Zobrazeno 1 - 10
of 65
pro vyhledávání: '"Alexander Gabay"'
Publikováno v:
IEEE Transactions on Magnetics. 58:1-5
Autor:
A. Martín-Cid, George C. Hadjipanayis, Alexander Gabay, D. Niarchos, A.M. Schönhöbel, Jose Manuel Barandiaran
Publikováno v:
Engineering, Vol 6, Iss 2, Pp 141-147 (2020)
Iron-rich compounds with the tetragonal ThMn12-type structure have the potential to meet current demands for rare-earth-lean permanent magnets with high energy density and operating temperatures of 150–200 °C. However, while it is normal for magne
Publikováno v:
IEEE Magnetics Letters. 11:1-4
Mn–Bi alloys modified with Mg and other elements were recently developed into promising rare-earth-free permanent magnets through successive melt spinning, warm compaction, and short magnetic field annealing. This letter reports on the crystal stru
Publikováno v:
Journal of Alloys and Compounds. 792:77-86
Melt-spun Mn50Bi50-xSbx alloys with x ≤ 5 were prepared at different solidification rates and characterized both in the as-spun state and after annealing. In the as-spun alloys, the Sb substitution leads to the formation of a metastable phase, simi
Autor:
George C. Hadjipanayis, A.M. Schönhöbel, Rajasekhar Madugundo, Alexander Gabay, Jose Manuel Barandiaran
Publikováno v:
Journal of Alloys and Compounds. 791:1122-1127
A bulk magnet based on Sm-Fe-V with the ThMn12 crystal structure has been fabricated for the first time by hot-compaction of mechanically milled powders with a density of 92% of the theoretical density. The isotropic magnet exhibits a maximum coerciv
Publikováno v:
Journal of Magnetism and Magnetic Materials. 541:168550
Powders of Sm(Fe,Co)11.2Ti0.8 alloys modified with Sc, Nb and Zr, as well as with additional Ti were prepared by reducing mechanically activated raw oxides with Ca metal in the furnace preheated to 990–1250 °C. Expansion of the crystal lattice upo
Autor:
David J. Sellmyer, Matthew J. Kramer, Alexander Gabay, Balamurugan Balasubramanian, George C. Hadjipanayis, Fei Liu, Jun Cui, Lin Zhou
Publikováno v:
Acta Materialia. 158:118-137
Permanent magnets (PM) are critical components for electric motors and power generators. Key properties of permanent magnets, especially coercivity and remanent magnetization, are strongly dependent on microstructure. Understanding metallurgical proc
Publikováno v:
IEEE Magnetics Letters. 9:1-5
In recent years, infiltration of hot-deformed Nd-Fe-B magnets with liquid Nd- and Pr-rich alloys has been intensively studied as a cost-effective way of increasing the magnet coercivity $H_{{\text{c}}}$ and, ultimately, its maximum operating temperat
Autor:
George C. Hadjipanayis, Alexander Gabay, Laura H. Lewis, Ian McDonald, B.T. Lejeune, Radhika Barua
Publikováno v:
Journal of Alloys and Compounds. 731:995-1000
The effects of Ge substitution and synthesis via rapid solidification on the structure and magnetic character of the intermetallic Fe 5 SiB 2 (5-1-2) system were determined, with the objective to investigate the potential of Fe 5 (Si 0 . 75 Ge 0.25 )