Zobrazeno 1 - 10
of 498
pro vyhledávání: '"Alex A. Volinsky"'
Autor:
Gulsharat A. Baigonakova, Ekaterina S. Marchenko, Ivan I. Gordienko, Victor A. Larikov, Alex A. Volinsky, Anna O. Prokopchuk
Publikováno v:
ACS Omega, Vol 9, Iss 24, Pp 25638-25645 (2024)
Externí odkaz:
https://doaj.org/article/9cf99362b31c443fbb83ea069ade541b
Autor:
Lihua Li, Jiacan Zhang, Meng Zhou, Baohong Tian, Yi Zhang, Ke Jing, Xu Li, Huiwen Guo, Alex A. Volinsky
Publikováno v:
Journal of Materials Research and Technology, Vol 30, Iss , Pp 9612-9624 (2024)
In this study, Al2O3–Cu/35Mo composites were prepared by rapid hot-press sintering-internal oxidation method, and the materials were modified by adding trace amounts of graphene oxide (GO). The results show that the relative densities of the compos
Externí odkaz:
https://doaj.org/article/62dc65a5269249248efa04202e08d3de
Autor:
Gang'ao Xin, Meng Zhou, Ke Jing, Haoyan Hu, Zheng'ao Li, Yi Zhang, Caijiao Tian, Yonghui Sun, Baohong Tian, Xu Li, Alex A. Volinsky, Jin Zou
Publikováno v:
Journal of Materials Research and Technology, Vol 30, Iss , Pp 4961-4972 (2024)
Compression tests of the Cu-1.5Ti and Cu-1.5Ti-0.5Fe alloys were carried out using the Gleeble-1500D hot deformation simulator. The deformation temperature was 750–900 °C and the strain rate was 0.1–0.003 s−1. The Cu-1.5Ti-0.5Fe alloy clearly
Externí odkaz:
https://doaj.org/article/1080d05c91d0477cacbce4072da03223
Autor:
Hanjing Zhu, Meng Zhou, Ke Jing, Baohong Tian, Yi Zhang, Xu Li, Yunzhang Li, Xianhua Zheng, Heng Li, Zipeng Ma, Yong Liu, Alex A. Volinsky, Jin Zou
Publikováno v:
Journal of Materials Research and Technology, Vol 26, Iss , Pp 7444-7459 (2023)
The 0.5Y2O3/Al2O3-Cu/30Mo3SiC and 0.3GO-0.5Y2O3/Al2O3-Cu/30Mo3SiC composites were fabricated by fast hot press sintering. Hot compression tests of the composites were carried out using the Gleeble-1500 simulator at 0.001–10 s−1 strain rates and 6
Externí odkaz:
https://doaj.org/article/4e07ed1c92e04555b3ae92888491f07c
Autor:
Meng Zhou, Shunlong Tang, Yi Zhang, Xianhua Zheng, Deye Xu, Zhiyang Zhang, Yunzhang Li, Lihua Fu, Xu Li, Baohong Tian, Yanlin Jia, Yong Liu, Alex A. Volinsky, Zhiyu Han
Publikováno v:
Journal of Materials Research and Technology, Vol 24, Iss , Pp 4888-4903 (2023)
The Cu–Ni–Sn–Ti–Cr and Cu–Ni–Sn–Ti–Cr–Ce alloys were compressed at 500–900 °C with 0.001–10 s−1 strain rates using the Gleeble 1500 deformation simulator. The effects of Ce addition on the microstructure and recrystallized gr
Externí odkaz:
https://doaj.org/article/f8e357f66b6c4926b01cf3186c3bd1d3
Autor:
Ekaterina S. Marchenko, Alexander A. Kozulin, Yuri F. Yasenchuk, Anna V. Vetrova, Alex A. Volinsky, Yi Zhang
Publikováno v:
Journal of Materials Research and Technology, Vol 22, Iss , Pp 3502-3510 (2023)
Porous NiTi samples were obtained by self-propagating high-temperature synthesis (SHS) and cut to specific dimensions by electrical discharge machining. Quasi-static compression of the porous SHS-NiTi alloy demonstrated that the deformation was elast
Externí odkaz:
https://doaj.org/article/b68c9b3d881040cf95c6ab0e115664a8
Autor:
Xianhua Zheng, Meng Zhou, Yi Zhang, Jinliang Huang, Yunzhang Li, Hanjing Zhu, Shunlong Tang, De Li, Shengli Liang, Baohong Tian, Yong Liu, Xu Li, Yanlin Jia, Alex A. Volinsky
Publikováno v:
Journal of Materials Research and Technology, Vol 22, Iss , Pp 2158-2173 (2023)
The aim of this study is to observe the organization and properties of Al2O3–Cu/WSiC–Y2O3 composites and to investigate the effect of Y2O3 incorporation on the electrical contact properties of the composites. Preparation of Al2O3–Cu/30W3SiC(0.5
Externí odkaz:
https://doaj.org/article/a07722ebdd7449059d9f30184277526f
Autor:
Yijie Ban, Meng Zhou, Yi Zhang, Yanlin Jia, Yong Pang, Yunzhang Li, Shunlong Tang, Xu Li, Alex A. Volinsky, Ekaterina S. Marchenko
Publikováno v:
Materials & Design, Vol 228, Iss , Pp 111819- (2023)
In the present work, the Cu-1.35Ni-1Co-0.55Si alloy with multiple twins and ultra-low interfacial mismatch precipitates was obtained by liquid nitrogen dynamic plastic deformation (DPD) and aging treatment. It has abnormally high work hardening abili
Externí odkaz:
https://doaj.org/article/06b14b608f7240fd8e1209e938abf62b
Autor:
Lihua Li, Shuang Liu, Meng Zhou, Yi Zhang, Shengli Liang, Jinliang Huang, Baohong Tian, Yongfeng Geng, Yijie Ban, Yong Liu, Yanlin Jia, Xu Li, Alex A. Volinsky
Publikováno v:
Journal of Materials Research and Technology, Vol 18, Iss , Pp 1412-1423 (2022)
The effect of graphene on the thermal deformation of Cu/CeO2/Cr and GO-Cu/CeO2/Cr composites was studied. The isothermal compression test was carried out with Gleeble-1500D thermomechanical simulation device in the range of 600–900 °C and strain r
Externí odkaz:
https://doaj.org/article/a901a56678584e95844547486ac31ba2
Autor:
Yongfeng Geng, Yijie Ban, Bingjie Wang, Xu Li, Kexing Song, Yi Zhang, Yanlin Jia, Baohong Tian, Yong Liu, Alex A. Volinsky
Publikováno v:
Journal of Materials Research and Technology, Vol 9, Iss 5, Pp 11918-11934 (2020)
Copper alloys are widely used in the lead frame, high-speed railway and other applications due to their high electrical conductivity and adequate mechanical properties. In this work, the texture and microstructure evolution under hot deformation of C
Externí odkaz:
https://doaj.org/article/c91c4d46e70b451980d5854e550ce31f