Zobrazeno 1 - 10
of 105
pro vyhledávání: '"Alessandro Pirondi"'
Autor:
Mattia Frascio, Lorenzo Bergonzi, Michal Jilich, Fabrizio Moroni, Massimiliano Avalle, Alessandro Pirondi, Margherita Monti, Matteo Vettori
Publikováno v:
Acta Polytechnica CTU Proceedings, Vol 25, Iss 0, Pp 41-47 (2019)
The work illustrates how building parameters of the Additive Manufacturing process Fused Filament Fabrication can affect not only the mechanical properties but also the surface wettability and morphology. Wettability and morphology are relevant fact
Externí odkaz:
https://doaj.org/article/3f86e33ac34946e59cbf5556d009884e
Publikováno v:
Materials, Vol 14, Iss 14, p 3778 (2021)
The purpose of this work is to compare the co-bonding vs. cold-bonding route on the adhesive joint performance of a CFRP (Carbon Fiber Reinforced Polymer) laminate–aluminum connection. In particular, the overlap shear, tensile strength and Mode I a
Externí odkaz:
https://doaj.org/article/eb36518125e947dc973054a3f2236336
Publikováno v:
Frattura ed Integrità Strutturale, Vol 13, Iss 47 (2018)
Adhesive bonding is the elective joining system between Carbon-Fiber Reinforced Polymer (CFRP) parts because, with respect to fastening, it allows a large connection area, no additional parts (hence weight saving) and no need to drill holes into the
Externí odkaz:
https://doaj.org/article/53f7425e5957439ca9c28b3f5b727233
Publikováno v:
Materials, Vol 14, Iss 7, p 1692 (2021)
The study is aimed at developing a modular lattice base for automatic food machines, starting with a solution already patented by some of the authors. In this case, welded carpentry modules were interlocked with a system of profiles and metal inserts
Externí odkaz:
https://doaj.org/article/1d31f4394cfe4446a480ff86b19d3823
Publikováno v:
Materials, Vol 12, Iss 11, p 1733 (2019)
Shape-adaptive or morphing capability in both aerospace structures and wind turbine blade design is regarded as significant to increase aerodynamic performance and simplify mechanisms by reducing the number of moving parts. The underlying bistable be
Externí odkaz:
https://doaj.org/article/bd1874a224ea4ae5803ac9731d2eda18
Autor:
Alessandro Pirondi
Publikováno v:
Frattura ed Integrità Strutturale, Vol 3, Iss 10, Pp 21-28 (2009)
In this work, Cohesive Zone Modelling (CZM) was used to simulate failure of T-peel bonded joints with 1.5mm thick adherends, respectively, bonded toghether with Loctite Multibond 330 adhesive. The fracture toughness and load-opening behaviour recorde
Externí odkaz:
https://doaj.org/article/b69cb59502ab4e6bbecff1964b1aad62
Autor:
Alessandro Pirondi
Publikováno v:
Frattura ed Integrità Strutturale, Vol 3, Iss 10 (2013)
In this work, Cohesive Zone Modelling (CZM) was used to simulate failure of T-peel bonded joints with 1.5mm thick adherends, respectively, bonded toghether with Loctite Multibond 330 adhesive. The fracture toughness and load-opening behaviour recorde
Externí odkaz:
https://doaj.org/article/3d4a1b348c5b44c79c7709b40895be15
Publikováno v:
International Journal of RF Technologies. 13:37-51
Data collection during the production process plays a key role in the management and control of goods within the company. In this work, the main focus is on the possibility of embedding radio frequency identification (RFID) technology in carbon-fibre
Autor:
Giovanni Meneghetti, Alberto Campagnolo, Alberto Visentin, Massimiliano Avalle, Matteo Benedetti, Andrea Bighelli, Davide Castagnetti, Andrea Chiocca, Luca Collini, Massimiliano De Agostinis, Alessandro De Luca, Eugenio Dragoni, Stefano Fini, Vigilio Fontanari, Francesco Frendo, Alessandro Greco, Giuseppe Marannano, Fabrizio Moroni, Antonio Pantano, Alessandro Pirondi, Alessandro Rebora, Alessandro Scattina, Raffaele Sepe, Andrea Spaggiari, Bernardo Zuccarello
Publikováno v:
Fatigue & Fracture of Engineering Materials & Structures. 45:1005-1034
The peak stress method (PSM) allows a rapid application of the notch stress intensity factor (NSIF) approach to the fatigue life assessment of welded structures, by employing the linear elastic peak stresses evaluated by FE analyses with coarse meshe
Publikováno v:
The Journal of Adhesion. 98:606-636
In order to optimize the stiffness/weight ratio and to reduce the manufacturing time, Additive Manufacturing (AM) components are built up by a solid skin and a partially filled core. The filled/tot...