Zobrazeno 1 - 10
of 932
pro vyhledávání: '"Al-Mg alloys"'
Autor:
Jinqi Wang, Yuming Xie, Xiangchen Meng, Yaobang Zhao, Shuming Sun, Junchen Li, Jialin Chen, Huizi Chen, Xiaotian Ma, Naijie Wang, Yongxian Huang
Publikováno v:
Virtual and Physical Prototyping, Vol 19, Iss 1 (2024)
The formation of eutectic Al-Mg2Al3 phases along the grain boundaries makes it difficult to improve the mechanical properties of high-magnesium-content aluminum alloys. Here, wire-based friction stir additive manufacturing(W-FSAM) was proposed as a n
Externí odkaz:
https://doaj.org/article/d91e94452b25427fbb70b255de54824d
Publikováno v:
Frattura ed Integrità Strutturale, Vol 19, Iss 71 (2024)
This study investigates the effects of complex (nonproportional) loading on plastic deformation in aluminum alloys (Al-6% Mg), with a focus on understanding surface morphology changes driven by the Portevin–Le Chatelier effect. Mechanical tests on
Externí odkaz:
https://doaj.org/article/21545d77a617425db4d30d415ba65f43
Publikováno v:
Journal of Materials Research and Technology, Vol 30, Iss , Pp 6787-6801 (2024)
In this article, wear and microstructure behaviors of dissimilar Al–Mg joints made by friction stir welding (FSW) with the addition of TiC nanoparticles under different welding parameters were investigated. Optimal joining conditions were achieved
Externí odkaz:
https://doaj.org/article/889dfe2301ac4aeda5b9f3a58d60e0f7
Autor:
Nagaraja Santhosh, Anand Praveena Bindiganavile, Mariswamy Madhusudhan, Alkahtani Meshel Q., Islam Saiful, Khan Mohammad Amir, Khan Wahaj Ahmad, Bhutto Javed Khan
Publikováno v:
Reviews on Advanced Materials Science, Vol 63, Iss 1, Pp pp. 1110-1127 (2024)
Externí odkaz:
https://doaj.org/article/34639072238341f2a3595d1af0071eed
Publikováno v:
Journal of Materials Research and Technology, Vol 29, Iss , Pp 1535-1541 (2024)
To understand the microstructural factors controlling deformability during the forming process, a comprehensive analysis using in-situ scanning electron microscopy (SEM) with digital image correlation (DIC) for hot-dip Zn–6 %Al–3 %Mg alloy coatin
Externí odkaz:
https://doaj.org/article/35a0091da83a459d9a046f5d0d654170
Publikováno v:
Corrosion and Materials Degradation, Vol 5, Iss 1, Pp 27-51 (2024)
This paper investigates the effect of the microstructure on the corrosion behavior of cold sprayed (CS) AA5083 compared to its wrought counterpart. It has been shown that the microstructure of CS aluminum alloys, such as AA2024, AA6061, and AA7075, a
Externí odkaz:
https://doaj.org/article/dd40b00d224e4a7290ac9271572649e3
Autor:
H. Parvin, M. Kazeminezhad
Publikováno v:
Journal of Materials Research and Technology, Vol 28, Iss , Pp 3013-3024 (2024)
Although Al–Mg alloys have various desirable properties, to broaden the applications, it is needed to increase the strength of these alloys. Severe plastic deformation (SPD) is a candidate method for this purpose. In this paper, a model is presente
Externí odkaz:
https://doaj.org/article/cc3b937139784704bf80522f5fb8e393
Publikováno v:
Journal of Advanced Joining Processes, Vol 9, Iss , Pp 100206- (2024)
Some aluminum alloys, such as those alloyed with Si and Mg, are difficult to weld due to their susceptibility to hot cracking. Previous research has investigated this challenge in resistance spot welding (RSW). To improve the weldability of the AW-61
Externí odkaz:
https://doaj.org/article/6c314d0639244b139dc1b06d0cb1b98c
Publikováno v:
Corrosion and Materials Degradation, Vol 4, Iss 2, Pp 317-330 (2023)
We address here an important issue related to sensitization effects in Al5083 by mitigating the grain boundary precipitation of the beta phase and demonstrate that the addition of a small amount of boron to Al5083 impedes the precipitation of the bet
Externí odkaz:
https://doaj.org/article/872c5dc854ed4979a076108ca12b865e
Publikováno v:
Metals, Vol 14, Iss 5, p 549 (2024)
Aluminum–magnesium (Al–Mg) alloys, known for their lightweight properties, are extensively utilized and crucial in the advancement of wire and arc additive manufacturing (WAAM) for direct high-quality printing—a focal point in additive manufact
Externí odkaz:
https://doaj.org/article/dcdf9e228eb541f0a3f4459c8d7d394d