Zobrazeno 1 - 10
of 60
pro vyhledávání: '"Akeem Yusuf Adesina"'
Autor:
Abbas Saeed Hakeem, Akeem Yusuf Adesina, Abdul Samad Mohammed, Mirza Murtuza Ali Baig, Muhammad Ali Ehsan, Ahmed Al Ghanim, Nasirudeen Ogunlakin, Syed Ali Abbas, Turki Nabieh Mohammad Baroud
Publikováno v:
Journal of Materials Research and Technology, Vol 26, Iss , Pp 2394-2406 (2023)
Refractory high-entropy alloys (RHEAs) with varying Al composition AlxCr0.25Nb0.5Ta0.5Ti1.5 (x = 0.5, 1) possessing a single body-centered cubic phase were prepared by arc melting followed by casting in a copper mold. The developed RHEAs were subject
Externí odkaz:
https://doaj.org/article/27fef0c204ad41dab6a4cb06b48054af
Autor:
Abba A. Abubakar, Syed Sohail Akhtar, Amer D. Alotaibi, Khaled S. Al-Athel, Abbas S. Hakeem, Akeem Yusuf Adesina
Publikováno v:
Journal of Materials Research and Technology, Vol 23, Iss , Pp 5861-5879 (2023)
There is an increasing demand for developing new cutting tools with exceptional thermomechanical and tribological properties to meet the growing demands of the machining industry. By introducing a novel concept of functionally graded (FG) materials,
Externí odkaz:
https://doaj.org/article/e1e908451397401b9e79e63fc67c5f29
Autor:
Ibrahim H. Zainelabdeen, Fadi A. Al-Badour, Akeem Yusuf Adesina, Rami Suleiman, Fadi A. Ghaith
Publikováno v:
International Journal of Lightweight Materials and Manufacture, Vol 6, Iss 1, Pp 129-139 (2023)
In the current study, friction stir surface processing (FSSur.P) was carried out to alter the surface microstructure of 6061 aluminum alloy using a pinless friction stir tool. The impact of rising tool rotational speed from 400 to 1200 rpm while keep
Externí odkaz:
https://doaj.org/article/aa7c9e3323b843d682c4cd4b5332ecb3
Autor:
Arumugam Madhan Kumar, Akeem Yusuf Adesina, Jothi Veeramani, Mohammad Mizanur Rahman, J. S. Nirmal Ram
Publikováno v:
Corrosion and Materials Degradation, Vol 3, Iss 4, Pp 612-627 (2022)
Hybrid treatments consisting of surface modification and subsequent protective coatings have gained extensive attention among corrosion mitigation approaches for a wide variety of structural metallic materials. This study aims to review the enhanceme
Externí odkaz:
https://doaj.org/article/05923e6e4fa842d2b4a7ff0b16c1fd44
Autor:
Abba A. Abubakar, Akeem Yusuf Adesina, Abul Fazal M. Arif, Jafar Albinmousa, Khaled S. Al-Athel, S. Sohail Akhtar
Publikováno v:
Journal of Materials Research and Technology, Vol 20, Iss , Pp 867-881 (2022)
Plasma spraying is commonly used to deposit thick metallic coatings. The high deposition temperature and complex interaction of the process parameters result in tensile residual stresses in thick metallic layers. Tensile residual stresses are widely
Externí odkaz:
https://doaj.org/article/6218b7736d4f4d93957c8e9cfa59955d
Publikováno v:
Metals, Vol 13, Iss 8, p 1479 (2023)
Stainless steel is one of the most commonly used structural materials in industry for the transportation of liquids such as water, acids, and organic compounds. Corrosion is a major concern in industry due to the use of strong mineral acids, feedstoc
Externí odkaz:
https://doaj.org/article/2c4a5db124de4ddcb2ef15f177d07daf
Autor:
Akeem Yusuf Adesina, Abbas Saeed Hakeem, Muhammad Umar Azam, Bilal Anjum Ahmed, Almigdad B. Ibrahim, Muhammad Ali Ehsan, Ahmad A. Sorour
Publikováno v:
Journal of Materials Research and Technology, Vol 9, Iss 6, Pp 14645-14661 (2020)
This study attempt to investigate microstructural, thermomechanical and tribological properties of low-temperature sintered cBN and Ni-coated cBN reinforced bearing steel composites. Ultrasonic probe sonication and spark plasma sintering (SPS) at 900
Externí odkaz:
https://doaj.org/article/fd72016cd0424aa58d0529ed4ac7556e
Publikováno v:
Journal of Materials Research and Technology, Vol 8, Iss 1, Pp 436-446 (2019)
In this study, the mechanical and tribological properties of cathodic arc physical vapor deposited AlCrN coating on spark plasma sintered W–25%Re–HfC composite tool material were investigated. AlCrN coated and uncoated W–25%Re–HfC samples wer
Externí odkaz:
https://doaj.org/article/4e9cf3444f574c6d8f0a1031ef51626a
Autor:
Nedal Y. Abu-Thabit, Abdul Kalam Azad, Khaled Mezghani, Abbas S. Hakeem, Qasem A. Drmosh, Sultan Akhtar, Akeem Yusuf Adesina
Publikováno v:
ACS Applied Polymer Materials. 4:8450-8460
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::d343574f9583ee1a12e2563e94f72c4a
https://doi.org/10.1021/acsapm.2c01371
https://doi.org/10.1021/acsapm.2c01371
Publikováno v:
Journal of Coatings Technology and Research. 19:1673-1686
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::086a3966e2cea088c33dabae4602e584
https://doi.org/10.1007/s11998-022-00639-5
https://doi.org/10.1007/s11998-022-00639-5