Zobrazeno 1 - 10
of 22
pro vyhledávání: '"Ahmed Saieed"'
Publikováno v:
Thermo, Vol 2, Iss 3, Pp 209-231 (2022)
The group combustion characteristics of core–shell nanothermite particles differ from other dispersed solid or liquid fuels. In a core–shell structure, each discrete nanothermite particle can undergo an exothermic reaction as the oxygen atoms in
Externí odkaz:
https://doaj.org/article/0287180e76d4406b92db2c28529480e9
Autor:
Faheem Ejaz, William Pao, Mohammad Shakir Nasif, Ahmed Saieed, Zeeshan Q. Memon, Md Nuruzzaman
Publikováno v:
Engineering Science and Technology, an International Journal, Vol 24, Iss 5, Pp 1211-1223 (2021)
T-junction is broadly utilized for phase separation, as it has a notable function as a conduit to distribute fluid, due to its simple design, low maintenance cost and adaptability to offshore industries. The geometrical parameters that influence phas
Externí odkaz:
https://doaj.org/article/8c94674639e04d38a0e8624fbbb44edd
Publikováno v:
Acta Polytechnica, Vol 59, Iss 4, Pp 399-410 (2019)
This article presents a design and commissioning of a multiphase flow loop, which was developed for scrutinizing the partial phase separation characteristics of pipe Tees. Its length is 9m and its primary diameter is 0.078m (3 inches). For the ease o
Externí odkaz:
https://doaj.org/article/69e2f0a8ebcb42328593d8e9336c7459
Publikováno v:
Journal of Mechanical Engineering and Sciences, Vol 12, Iss 4, Pp 4216-4230 (2018)
Liquid carryover in T-junction due to splitting nature of two-phase flow causes serious issues for downstream equipment which is not designed to handle excessive liquid. In this paper, the phenomena of liquid carryover in T-junctions were analyzed us
Externí odkaz:
https://doaj.org/article/3fa2714dc7df4124a7457aa5d9039c58
Publikováno v:
Platform, a Journal of Engineering, Vol 1, Iss 1, Pp 44-65 (2017)
T-junction is commonly used in distributing two-phase flow in a piping system, especially in oil and gas industries. In offshore Malaysia, T-junction is installed at the production header as a compact separator to tap produced gas from reservoir as f
Externí odkaz:
https://doaj.org/article/08140f83ecdb46cebfadc6c2e748a820
Publikováno v:
Petroleum Science and Technology. :1-25
Autor:
Zeeshan Qadir Memon, Mohammad Shakir Nasif, Faheem Ejaz, William Pao, Ahmed Saieed, Nuruzzaman
Publikováno v:
Engineering Science and Technology, an International Journal, Vol 24, Iss 5, Pp 1211-1223 (2021)
T-junction is broadly utilized for phase separation, as it has a notable function as a conduit to distribute fluid, due to its simple design, low maintenance cost and adaptability to offshore industries. The geometrical parameters that influence phas
Publikováno v:
International Journal of Multiphase Flow. 155:104185
Publikováno v:
Acta Polytechnica, Vol 59, Iss 4, Pp 399-410 (2019)
This article presents a design and commissioning of a multiphase flow loop, which was developed for scrutinizing the partial phase separation characteristics of pipe Tees. Its length is 9m and its primary diameter is 0.078m (3 inches). For the ease o
Autor:
Hasan Koten, Muhammad Abid, William Pao, Hassan Ali, Majid Ahmadlouydarab, Ahmed Saieed, Muhammad Abubaker, Hafiz Ali Muhammad
Publikováno v:
Thermal Science, Vol 23, Iss 6 Part B, Pp 3887-3892 (2019)
The extent of condensate flooding as a function of condensate flow rate is measured on six horizontal pin-fin tubes (varying in circumferential pin-spacing) via simulated experimentation. Surface tension to density ratio is tested using three fluids