Zobrazeno 1 - 10
of 51
pro vyhledávání: '"Adnan Özel"'
Publikováno v:
Frattura ed Integrità Strutturale, Vol 14, Iss 52 (2020)
Development in material science impose to use different materials in production. This causes a problem for joining different materials because traditional joining techniques such as welding could not overcome this problem in industries such as automo
Externí odkaz:
https://doaj.org/article/44cb605e0142447d90b2f915c676422f
Publikováno v:
Pamukkale University Journal of Engineering Sciences, Vol 2, Iss 3, Pp 177-183 (1996)
Bu çalışmada çeki demirindeki gerilme analizi sonlu elemanlar metoduyla yapılmıştır. Sonlu eleman modelinin kurulmasında dört düğümlü izoparametrik elemanlar kullanılmış olup interpolasyon fonksiyonu olarak ise Lagrange polinomları
Externí odkaz:
https://doaj.org/article/defbf4604e474d2cb78b919b8f6bdb44
Publikováno v:
Pamukkale University Journal of Engineering Sciences, Vol 2, Iss 3, Pp 177-183 (1996)
In this study, stress analysis has been done in Hooke's joint by the finite element method. In finite element meshing, isoparametric quadrilateral elements with four nodes has been chosen and Lagrange polynomial has been used as the interpolation fun
Externí odkaz:
https://doaj.org/article/6b80f405499549bc9a41c89bc911ad5e
Publikováno v:
Pamukkale University Journal of Engineering Sciences, Vol 2, Iss 1, Pp 55-60 (1996)
Aynı konstrüksiyon üzerinde kullanılan birbirinden farklı özelliklere sahip malzemelerin birleştirilmesinin gerekliliği bazı problemler ortaya koymaktadır. Kaynak teknolojisinin gelişmesiyle farklı metaller belirli şartlar altında kayna
Externí odkaz:
https://doaj.org/article/2b535546e6f847a59c9d027e41873f53
Publikováno v:
Pamukkale University Journal of Engineering Sciences, Vol 2, Iss 1, Pp 55-60 (1996)
Aynı konstrüksiyon üzerinde kullanılan birbirinden farklı özelliklere sahip malzemelerin birleştirilmesinin gerekliliği bazı problemler ortaya koymaktadır. Kaynak teknolojisinin gelişmesiyle farklı metaller belirli şartlar altında kayna
Externí odkaz:
https://doaj.org/article/97387f4122a0420c9759859bb5aba456
Publikováno v:
Pamukkale University Journal of Engineering Sciences, Vol 2, Iss 1, Pp 55-60 (1996)
In the necessity of dissimilar materials having different characteristic used on the same construction brings up some problems. With the developing of welding technology, dissimilar metals can be welded under certain conditions. In this study, the jo
Externí odkaz:
https://doaj.org/article/68acd73c00cd429696f676febbc63f09
Autor:
Osman Orhan, Adnan Özel
Publikováno v:
International Journal of Energy Research. 45:2668-2679
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::fc9c076922bc0b97d71f97ac0d3b6069
https://doi.org/10.1002/er.5959
https://doi.org/10.1002/er.5959
The effect of opposing notch geometry on the tensile strength of adhesively bonded single-lap joints
Autor:
Salim Çam, Adnan Özel
Publikováno v:
Engineering Computations. 37:2895-2911
Purpose This study aims to investigate the effect of opposing notches formed on the adherends on the tensile strength of an adhesively bonded single-lap joint. Design/methodology/approach Different notch geometries were constructed on adherends and e
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::92f1779774a90ff952cf598926a8a973
https://doi.org/10.1108/ec-11-2019-0534
https://doi.org/10.1108/ec-11-2019-0534
Publikováno v:
Frattura ed Integrità Strutturale; Vol. 14 No. 52 (2020): April 2020; 9-24
Frattura ed Integrità Strutturale; V. 14 N. 52 (2020): April 2020; 9-24
Frattura ed Integrità Strutturale, Vol 14, Iss 52, Pp 9-24 (2020)
Frattura ed Integrità Strutturale, Vol 14, Iss 52 (2020)
Frattura ed Integrità Strutturale; V. 14 N. 52 (2020): April 2020; 9-24
Frattura ed Integrità Strutturale, Vol 14, Iss 52, Pp 9-24 (2020)
Frattura ed Integrità Strutturale, Vol 14, Iss 52 (2020)
Development in material science impose to use different materials in production. This causes a problem for joining different materials because traditional joining techniques such as welding could not overcome this problem in industries such as automo
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::56b814dc8d7ef6917216821ab26306a2
https://www.fracturae.com/index.php/fis/article/view/2674
https://www.fracturae.com/index.php/fis/article/view/2674
Publikováno v:
Theoretical and Applied Fracture Mechanics. 97:120-130
In this study, the fracture behavior of nanocomposite adhesives produced by adding nanostructure in to the adhesives were investigated using Double Cantilever Beam (DCB) test under ambient temperature and thermal cycle conditions. Adhesively bonded D
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::935d26e6719284e975a5ddda3a844f5c
https://doi.org/10.1016/j.tafmec.2018.08.006
https://doi.org/10.1016/j.tafmec.2018.08.006