Zobrazeno 1 - 10
of 12
pro vyhledávání: '"Adina BUDIUL BERGHIAN"'
Publikováno v:
European Journal of Materials Science and Engineering, Vol 6, Iss 4, Pp 212-219 (2021)
In the steel industry, scrap metal is an important raw material resource for the electric arc furnace. The overall steel recycling rate is estimated at around 85%. The work presents an analysis of the structure of the metal load when elaborating stee
Externí odkaz:
https://doaj.org/article/530030c507394e61a1cb93fac2800d70
Publikováno v:
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science, Vol 44, Iss 2, Pp 17-23 (2021)
For any industrial entity put into operation, it is of interest to its ability to fulfil its mission under certain conditions, at a given time or during a given period of time, assuming that the means of maintenance are provided. This represents avai
Externí odkaz:
https://doaj.org/article/e6b169cda5d34468a859af423acdb607
Autor:
Teodor VASIU, Adina BUDIUL BERGHIAN
Publikováno v:
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science, Vol 41, Iss 3 (2018)
For any industrial entity that is put into operation, the problem of maintaining its functioning if possible, with corresponding technical and technological parameters without failure is an important issue. This is provided by the study of the techni
Externí odkaz:
https://doaj.org/article/19a7472e05684f1a830d4b348fa427b6
Publikováno v:
In Materials Today: Proceedings 2023 78 Part 2:343-347
Publikováno v:
Materiale Plastice. 59:13-20
The paper presents the results obtained after the tribology of composite materials with organic components intended for the manufacturing of brake shoes for motor and towed rolling stock. We analyzed the tribological behaviour of the samples of exper
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6e01abfb2dda826bf61fe261a494b486
https://doi.org/10.37358/mp.22.3.5602
https://doi.org/10.37358/mp.22.3.5602
Publikováno v:
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science, Vol 44, Iss 2, Pp 17-23 (2021)
For any industrial entity put into operation, it is of interest to its ability to fulfil its mission under certain conditions, at a given time or during a given period of time, assuming that the means of maintenance are provided. This represents avai
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::4b4f4ab82887c34b2dd6fb14149bf7aa
https://www.gup.ugal.ro/ugaljournals/index.php/mms/article/view/4487
https://www.gup.ugal.ro/ugaljournals/index.php/mms/article/view/4487
Publikováno v:
Materiale Plastice. 56:190-193
The aim of the present study is to model the steady heat transfer of the engine polyamide intake manifold. Under the condition of a steady flow, the intake manifold wall temperature and the intake air temperature were measured to examine the effect o
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5e7541563fdbd7e53d831c38b75d6120
https://doi.org/10.37358/mp.19.1.5149
https://doi.org/10.37358/mp.19.1.5149
Autor:
T Vasiu, Adina Budiul Berghian
Publikováno v:
The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science, Vol 41, Iss 3 (2018)
For any industrial entity that is put into operation, the problem of maintaining its functioning if possible, with corresponding technical and technological parameters without failure is an important issue. This is provided by the study of the techni
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::c146ff815a376f50800f6e78f599fb76
https://doi.org/10.35219/mms.2018.3.08
https://doi.org/10.35219/mms.2018.3.08
Publikováno v:
AIP Conference Proceedings.
In this paper presents simulations related to kinematics mechanisms shears for cutting metallurgical products. These simulations were performed on bench-scale experiment conducted 1 : 5 to 8000kN Scissors on line rolling SF 1, existing within the com
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::bb02c28a7efce81d7f7e9e216da28e10
https://doi.org/10.1063/1.4825842
https://doi.org/10.1063/1.4825842
Publikováno v:
AIP Conference Proceedings.
This paper presents a mathematical model to determine the preventive maintenance cycles of shears type mechanisms assigned to cut metallurgical products. This model takes into account stochastic factors which influence the failure rates and working l
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::73e75cedbdba3333944fa360d0fc5463
https://doi.org/10.1063/1.4756247
https://doi.org/10.1063/1.4756247