Zobrazeno 1 - 10
of 179
pro vyhledávání: '"Adam HAMROL"'
Publikováno v:
Materials, Vol 17, Iss 9, p 1988 (2024)
This paper presents the results of research on the influence of the moisture content in a filament made of ABS polymer on the properties of products manufactured using FDM (fused deposition modeling). Tests were carried out on a standard printer, usi
Externí odkaz:
https://doaj.org/article/78b7f605c0574fc89d1ddb7176698d4f
Publikováno v:
Advances in Sciences and Technology, Vol 16, Iss 4, Pp 189-200 (2022)
Risk analysis of personalized medical devices, such as prostheses, is a challenging task due to the complexity of technological and geometrical issues. The paper undertakes a process of risk analysis for upper limb prostheses for adult patients, indi
Externí odkaz:
https://doaj.org/article/d18416082fad43ab9ff77b13e707d611
Publikováno v:
Bulletin of the Polish Academy of Sciences: Technical Sciences, Vol 70, Iss 6 (2022)
Contemporary societies are strongly dependent existentially and economically on the supply of electricity, both in terms of supplying devices from the power grid, as well as the use of energy storage and constant voltage sources. Electrochemical batt
Externí odkaz:
https://doaj.org/article/80a8d781bbd04bbfaed9c02f2fe90d9b
Publikováno v:
Materials, Vol 16, Iss 3, p 938 (2023)
The article presents the results of research on the influence of the natural moisture of a filament made of acrylonitrile–butadiene–styrene terpolymer (ABS) on the mechanical properties and quality of products fabricated with fused filament fabri
Externí odkaz:
https://doaj.org/article/a5a12516208040fcbca61b1ae4649d3a
Publikováno v:
Materials, Vol 16, Iss 2, p 630 (2023)
Belt grinding is commonly used in the finishing of non-functional shaped surfaces of surgical instruments. Most often it is carried out manually. The subject of this article is the possibility of replacing manual belt grinding with robotic grinding.
Externí odkaz:
https://doaj.org/article/e1a4a705dfaa402796680fc4d88cc81e
Autor:
Adam Hamrol, Marta Grabowska
Publikováno v:
Production and Manufacturing Research: An Open Access Journal, Vol 8, Iss 1, Pp 388-405 (2020)
The article presents a new approach to assess improvement actions performed in production enterprises. The evaluation criterion is adequacy of diagnostic tools that were used as improvement measures. Three aspects of improvements have been analysed:
Externí odkaz:
https://doaj.org/article/e2a2153eae5f4ac3bd5ee8211e7c3f67
Mechanical properties and geometric accuracy of angle-shaped parts manufactured using the FFF method
Publikováno v:
Bulletin of the Polish Academy of Sciences: Technical Sciences, Vol 69, Iss 3 (2021)
The paper presents the results of research on the influence of the parameters of Fused Deposition Modelling (FDM) on the mechanical properties and geometric accuracy of angle-shaped parts. The samples were manufactured from acrylonitrile butadiene st
Externí odkaz:
https://doaj.org/article/2b99e11fb7f9425580c21d39ddefba12
Publikováno v:
CIRP Journal of Manufacturing Science and Technology. 35:550-559
The article presents the possibility of compensating for the negative impact of filament humidity on the mechanical properties of parts produced by the FDM method by selecting appropriate process parameters, such as: layer thickness, deposition speed
Publikováno v:
Strojniški vestnik, vol. 67, no. 10, pp. 475-488, 2021.
The paper presents the methodology and implementation of original Automatic CAM programming using machining templates (ACPUT) dedicated to manufacturing special technological tooling. The development of ACPUT was inspired by the observation that alth
Publikováno v:
Modern Management Review, Vol XXII, Iss 1 (2017)
Artykuł przedstawia wyniki badań prowadzonych podczas realizacji projektu „Wdrożenie systemów zarządzania środowiskowego w MŚP” (finansowanego przez PARP w ramach Programu Operacyjnego Kapitał Ludzki), jak i po jego zakończeniu. Projekt
Externí odkaz:
https://doaj.org/article/a29b0820b4934ed5823cc21c7ded1b02