Zobrazeno 1 - 10
of 43
pro vyhledávání: '"A. N. Shuaib"'
Publikováno v:
IEEE Access, Vol 7, Pp 129874-129882 (2019)
A mathematical lumped model for horizontal operating three axes machine for Friction Stir Welding (FSW) of heat exchangers' tube to tubesheet, is formulated using Finite Element Analysis (FEM) in conjunction with Lagrange's equation formulations. The
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::e394e774c09e98732aa9c1e9f1f17b5c
https://ieeexplore.ieee.org/document/8822936/
https://ieeexplore.ieee.org/document/8822936/
Publikováno v:
Arabian Journal for Science and Engineering. 44:1233-1242
W–25%Re tool was used to friction stir weld ASTM A516-70 steel. This paper presents the results of studying the effects of rotational speed on tool reaction loads, tool wear, weld defects, and weld microstructure. The measured tool axial forces pro
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::fef73c6269a051645d5df73bd5381a48
https://doi.org/10.1007/s13369-018-3452-3
https://doi.org/10.1007/s13369-018-3452-3
Publikováno v:
Tribology International. 116:129-137
Wear characteristics of monolithic W-25wt%Re alloy spark plasma sintered at 1500 °C, 1700 °C and 1800 °C and W-25wt%Re-3.2wt%HfC composite sintered at 1800 °C, have been investigated. Higher sintering temperature of W-Re alloys resulted in higher
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1fe6c50aa51cad48201b8bce175f98da
https://doi.org/10.1016/j.triboint.2017.06.042
https://doi.org/10.1016/j.triboint.2017.06.042
Publikováno v:
Journal of Alloys and Compounds. 674:189-199
The development of tool materials for high temperature applications such as friction stir welding of steels and high strength materials remain a key challenge because these materials are difficult to synthesize and consolidate by conventional means.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::28fe59bf38bcdd1abe201efd3845f798
https://doi.org/10.1016/j.jallcom.2016.03.030
https://doi.org/10.1016/j.jallcom.2016.03.030
Publikováno v:
Volume 2: Materials; Joint MSEC-NAMRC-Manufacturing USA.
This paper deals with the development of friction stir diffusion bonding between 2 mm thick 5052 Aluminum alloy and Cold rolled Steel for cladding application. The investigation focuses on the effect of process conditions on tensile-shear strength of
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6514b1a3dc19ce26523822ffe0069fa7
https://doi.org/10.1115/msec2018-6711
https://doi.org/10.1115/msec2018-6711
Autor:
Mohammed Al-Mehthel, Ibnelwaleed A. Hussein, A. N. Shuaib, Sarfaraz Ahmed Furquan, Nagendiran Shanmugam, Adel Badghaish
Publikováno v:
Polymer Degradation and Stability. 112:94-103
Residual oil fly ash (OFA) was used in epoxy pipe formulations for total or partial replacement of commercial light stabilizer i.e. Hostavin ® N24 without influencing the thermal or mechanical properties of the pipes. The optimum amount of OFA was i
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ace91eacd67a9d1402aad1e92916991c
https://doi.org/10.1016/j.polymdegradstab.2014.12.016
https://doi.org/10.1016/j.polymdegradstab.2014.12.016
Publikováno v:
Volume 6A: Materials and Fabrication.
Friction stir welding and spot welding (FSW/FSSW) tool condition plays a vital role on joint quality and successful completion of welding process. Detecting FSW tool pin cracking or fracture during welding is not possible by visual monitoring of the
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::72abb8e6e38aac0240c8b82937c360df
https://doi.org/10.1115/pvp2017-65940
https://doi.org/10.1115/pvp2017-65940
Autor:
Shanmugam Nagendiran, Adel Badghaish, Mohammed Al-Mehthel, Ibnelwaleed A. Hussein, Sarfaraz Ahmed Furquan, A. N. Shuaib
Publikováno v:
Polymer Composites. 37:512-522
The utilization of oil fly ash (OFA) as a filler in polymer composites to enhance their strength and flow properties and reduce the cost of fabrication is a promising technique. OFA filled epoxy composites, based on bisphenol-A liquid epoxy, were pre
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ebf2f5ec0e305a1c2c5dc454c55e31b6
https://doi.org/10.1002/pc.23207
https://doi.org/10.1002/pc.23207
Publikováno v:
The International Journal of Advanced Manufacturing Technology. 72:607-617
A thermo-mechanical finite element model is developed based on Coupled Eulerian Lagrangian method to simulate the friction stir welding of dissimilar Al6061-T6 and Al5083-O aluminum alloys using different tool pin profiles. The model is validated usi
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::90f407f60d19695beea4bd2e6304d501
https://doi.org/10.1007/s00170-014-5680-3
https://doi.org/10.1007/s00170-014-5680-3
Publikováno v:
Journal of Materials Processing Technology. 213:1433-1439
A 3-dimensional localized finite element model (FEM) is developed to predict likely conditions that result in defect generation during friction stir welding (FSW). The workpiece is modeled using Eulerian formulation, while the tool is modeled using L
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::eb368e92fc870a6fabdef0125c1e5ed0
https://doi.org/10.1016/j.jmatprotec.2013.02.014
https://doi.org/10.1016/j.jmatprotec.2013.02.014