Zobrazeno 1 - 10
of 10
pro vyhledávání: '"A. J. Shakesheff"'
Publikováno v:
Materials Science and Technology. 14:949-958
A study of texture, microstructure, mechanical properties, and crack propagation mechanisms was carried out on aluminium alloy 2124 reinforced with 5 vol.-%SiC particles (3 μm). Three fabrication techniques have been used to produce the composites.
Publikováno v:
Materials Science and Technology. 14:1015-1023
The thermal performance of six commercially available particulate reinforced metal matrix composites (MMCs) has been investigated, including the effects of continuous thermal exposure and thermal cycling on ambient and elevated temperature tensile pr
Autor:
G. Purdue, A. J. Shakesheff
Publikováno v:
Materials Science and Technology. 14:851-856
Aluminium alloys have traditionally been used for the manufacture of missile structural parts. As the performance of missiles improves, kinetic heating will increase and the continued use of conventional monolithic aluminium alloys for the manufactur
Autor:
A. J. Shakesheff
Publikováno v:
Journal of Materials Science. 30:2263-2268
The effects of lithium content on the ageing characteristic and notched tensile properties of particulate reinforced Al-Li-Cu-Mg-Zr based metal matrix composites (MMCs) have been investigated. MMC sheet containing 20 wt% silicon carbide particulate p
Autor:
A. J. Shakesheff
Publikováno v:
Journal of Materials Science. 30:2269-2276
Metal-matrix composites (MMC) comprising powder aluminium alloys reinforced by particulate ceramic are being developed for widespread aerospace structural applications ranging from fuselage and missile components to undercarriage parts. Most interest
Publikováno v:
Materials Science and Technology. 7:276-282
The effect of super plastic deformation on the microstructure of the low density Al–Li–Cu–Mg–Zr (8090) alloy has been investigated. Changes in grain structure, grain misorientation, and texture were observed with increasing superplastic defor
Autor:
Alan J. Shakesheff
Publikováno v:
Metal Powder Report. 53:28-30
Developing metal matrix composites for both defence and civilian applications is part of the extensive research activities undertaken by the UK's Defence Evaluation and Research Agency (DERA). Increasingly, the organization is looking to involve priv
Autor:
A. J. Shakesheff, P. G. Partridge
Publikováno v:
Journal of Materials Science. 20:2408-2416
An Al-Zn-Mg alloy (7010) was cold-rolled and annealed to produce a small recrystallized grain size, and superplastically deformed in the temperature range 475 to 520° C at strain rates $$\dot \varepsilon = {\text{1}}{\text{.1 x 10}}^{{\text{ - 5}}}
Autor:
P. G. Partridge, A. J. Shakesheff
Publikováno v:
Journal of Materials Science. 21:1368-1376
Al-2.5 Li-1.2 Cu-0.6 Mg-0.12 Zr (wt%) alloy sheet was cold-rolled, solution heat-treated for 20 min at 510° C, prestrained by 3% and superplastically deformed at 450 to 540° C at strain rates between 1×10−4 and 2.8×10−1 sec−1. The maximum e
Publikováno v:
Materials Letters. 7:353-358
The effect of cooling rate from the solution heat-treatment temperature over the range 0.03°C s −1 to 1400°C s −1 has been investigated on the age-hardened properties of 8090 alloy sheet of varying copper content. For cooling rates > 4°C s −