Zobrazeno 1 - 10
of 33
pro vyhledávání: '"A. J. Dolata"'
Publikováno v:
Metalurgija, Vol 52, Iss 3, Pp 345-348 (2013)
A pressure-vacuum infiltration (T = 720 ºC, p = 15 MPa, t = 15 min) and gas-pressure infiltration (GPI) in an autoclave (T = 700ºC, p=4 MPa, t=5 min) were applied for infiltration of porous Al2O3 ceramics by cast aluminum alloy. Effect of the metho
Externí odkaz:
https://doaj.org/article/a7b46de552444fd8bf3736765494ab74
Publikováno v:
Materials, Vol 13, Iss 5612, p 5612 (2020)
Materials
Volume 13
Issue 24
Materials
Volume 13
Issue 24
The paper concerns modeling the microstructure of a hypereutectic aluminum-silicon alloy developed by the authors with the purpose of application for automobile cylinder liners showing high resistance to abrasive wear at least equal to that of cast-i
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::234b97f2c48abab0ea854b2156bc1fa1
https://www.mdpi.com/1996-1944/13/24/5612
https://www.mdpi.com/1996-1944/13/24/5612
Publikováno v:
Materials, Vol 13, Iss 2760, p 2760 (2020)
Materials
Volume 13
Issue 12
Materials
Volume 13
Issue 12
The research reported in the paper concerned the conditions of cooling high-chromium cast iron with about 15% Cr content capable to ensure completeness of transformation of supercooled austenite into martensite in order to obtain high hardness value
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::739a00d67f3dc1d149f6075b21c34227
https://www.mdpi.com/1996-1944/13/12/2760
https://www.mdpi.com/1996-1944/13/12/2760
Publikováno v:
Materials
Volume 13
Issue 7
Materials, Vol 13, Iss 1685, p 1685 (2020)
Volume 13
Issue 7
Materials, Vol 13, Iss 1685, p 1685 (2020)
The scratch test enables assessing the susceptibility of a material to the development of scratches and, being in some ways a measure of its abrasion resistance, allows extended knowledge in the field of material application usability, especially its
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::9f009890ebd41f9ed239e6b579726811
Publikováno v:
Materials
Materials, Vol 14, Iss 6410, p 6410 (2021)
Volume 14
Issue 21
Materials, Vol 14, Iss 6410, p 6410 (2021)
Volume 14
Issue 21
The main motivation behind the presented research was the regeneration of the damaged surface of composite materials. The testing of melting and pad welding of the composite surface by Gas Tungsten Arc Welding (GTAW) with alternating current (AC) wer
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::3ddab6d22ce5e86baf646991403caa1d
https://doi.org/10.3390/ma14216410
https://doi.org/10.3390/ma14216410
Publikováno v:
Materials, Vol 12, Iss 17, p 2803 (2019)
Materials
Volume 12
Issue 17
Materials
Volume 12
Issue 17
When designing the composition and structure of a composite material intended for tribological cooperation, many external and structural factors must be considered. The aim of this research was to compare the tribological properties (wear resistance
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::1708f33bfdafd25312857b79bf205e01
https://www.mdpi.com/1996-1944/12/17/2803
https://www.mdpi.com/1996-1944/12/17/2803
Publikováno v:
Archives of Metallurgy and Materials, Vol 61, Iss 2, Pp 651-656 (2016)
The aim of the work was to perform adequate selection of the phase composition of the composite designated for permanent - mould casting air compressor pistons. The hybrid composites based on AlSi7Mg matrix alloy reinforced with mixture of silicon ca
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::26e029d57cd993f7d0e6ddfe2bf01ce3
https://doi.org/10.1515/amm-2016-0111
https://doi.org/10.1515/amm-2016-0111
Publikováno v:
Archives of Metallurgy and Materials, Vol 61, Iss 2, Pp 705-708 (2016)
The main purpose of the investigations was to develop the phase composition of the composite assuming that the component selection criterion will be the formability of piston work surfaces during the machining. Wear resistance under the friction cond
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::b6bbabb08f7e06230c97e6fac6762161
http://www.degruyter.com/view/j/amm.2016.61.issue-2/amm-2016-0120/amm-2016-0120.xml?format=INT
http://www.degruyter.com/view/j/amm.2016.61.issue-2/amm-2016-0120/amm-2016-0120.xml?format=INT
Publikováno v:
Archives of Metallurgy and Materials, Vol 61, Iss 1, Pp 399-404 (2016)
The aim of the study was to describe the structure of composites based on the AlSi7Mg2Sr0.03 alloy matrix reinforced with SiC particles added in an amount of 10% and with a mixture of SiC and GR particles added in a total amount of 20%. Studies of th
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::8f73358ad7b16121aa532b91839c664f
https://doi.org/10.1515/amm-2016-0073
https://doi.org/10.1515/amm-2016-0073
Autor:
Anna J. Dolata
Publikováno v:
Archives of Metallurgy and Materials, Vol 61, Iss 1, Pp 411-418 (2016)
The goal of this work is the description of phenomena occurring during centrifugal infiltration of porous ceramic materials by liquid Al alloy. In this method, the pressure required to infiltration of liquid metal into pores of ceramic is generated b
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::3b118ae95c83b8bf8721f0527d6ff7b6
http://www.degruyter.com/view/j/amm.2016.61.issue-1/amm-2016-0075/amm-2016-0075.xml?format=INT
http://www.degruyter.com/view/j/amm.2016.61.issue-1/amm-2016-0075/amm-2016-0075.xml?format=INT