Zobrazeno 1 - 10
of 15
pro vyhledávání: '"A. F. Bicen"'
Autor:
C. K. Zoltani, A. F. Bicen
Publikováno v:
Experiments in Fluids. 9:295-298
The results of an experimental investigation into the behavior of unconfined, steady, fully turbulent, two-phase jets are described. A round jet of 25.4 mm in diameter, exit velocity of 20 m/s and containing 80 μm beads with a mass density of loadin
Publikováno v:
Volume 3: Coal, Biomass and Alternative Fuels; Combustion and Fuels; Oil and Gas Applications; Cycle Innovations.
Combustion characteristics of a model can-type combustor are reported for air/fuel ratios encompassing take-off and ground-idle conditions and for two swirlers with gaseous fuel and at atmospheric pressure. Temperatures were obtained with fine-wire t
Autor:
C. K. Zoltani, A. F. Bicen
Publikováno v:
Experiments in Fluids. 10:299-300
Flow visualizations obtained in a two-phase jet flow with 80 μm particles at a mass loading of 5% revealed the following. 1. Particles exited the jet tube in straight trajectories with “fan-spreading” angles of up to ±30°. The velocities of th
Publikováno v:
Proceedings of the Institution of Mechanical Engineers. 196:1-10
Measurements of ensemble-averaged axial velocities and the r.m.s. of the corresponding fluctuations, obtained by laser-Doppler anemometry, are reported for axisymmetric flow in a non-compressing piston-cylinder assembly motored at 200 rev/min simulat
Publikováno v:
AIAA Journal. 26:47-51
Reported here are the time-resolved and ensemble mean and rms fluid velocities obtained by laser Doppler anemometry in a subsonic gun simulator with an inert single-phase flow and a projectile exit velocity of 40 m/s. The results presented also inclu
Autor:
W.P. Jones, A. F. Bicen
Publikováno v:
Combustion Science and Technology. 49:1-15
Mean and rms values of the axial and swirl velocity components obtained by a laser Doppler anemometer in a model can-type gas turbine combustor under isothermal and combusting flow conditions are reported. The results show that the combustor swirl is
Publikováno v:
Journal of Fluids Engineering. 107:413-420
An experimental investigation of the airflow through various axisymmetric intake ports of a motored reciprocating engine is reported. Detailed velocity field measurements obtained by laser Doppler anemometry and for steady and various unsteady flow c
Publikováno v:
Journal of Fluids Engineering. 105:105-112
Measurements of the three components of velocity and their corresponding fluctuations have been obtained by laser-Doppler anemometry mainly near TDC of compression in a model IC engine motored at 200 rpm with compression ratio of 6.7. The flow config
Publikováno v:
Letters in Heat and Mass Transfer. 7:77-82
Measurements in a plexiglass piston-cylinder assembly with an open annular port located symmetrically on the cylinder head and imposing swirl, indicate that the vortex structure of the flow created by the outwards movement of the piston is destroyed
Publikováno v:
Journal of Engineering for Gas Turbines and Power. 111:90-96
Temperature and species concentration measurements have been obtained in a model combustor operating at an inlet temperature of 515 K and atmospheric pressure and are reported and discussed. The model comprises two rectangular sectors representing th