Zobrazeno 1 - 10
of 83
pro vyhledávání: '"陈诚直"'
Publikováno v:
Jianzhu Gangjiegou Jinzhan, Pp 48-53 (2016)
针对预应力钢柱基底含摩擦型消能装置的耐震性能进行研究,探讨初始钢绞线预应力与消能装置的影响。通过钢绞线施拉预应力接合钢柱与基础,用来提供钢柱自复位能力;消能装置采用摩擦型
Externí odkaz:
https://doaj.org/article/88d5586b6e6646a5baee86b9707f695d
Publikováno v:
Jianzhu Gangjiegou Jinzhan, Vol 13, Pp 45-51 (2011)
为探讨焊接瑕疵对于钢骨箱型柱板破裂行为的影响,本文采有限元素分析,根据裂缝尖端开口位移、应力三轴度与破裂指数等行为指标,来评估柱板破裂的可能性。有限元素模型参数分析结果显
Externí odkaz:
https://doaj.org/article/d627e4b5dd1048d0b7931c88e1a7ba3b
Publikováno v:
Jianzhu Gangjiegou Jinzhan, Vol , Pp 35-41 (2007)
传统抗弯构架之梁柱接头梁腹板以螺栓接合而梁翼板以全渗透焊接于柱,在北岭及阪神地震的侵袭下,梁柱接头处发生严重脆性破坏。本研究针对钢梁连接H型钢柱之接头,以扩大接头处梁翼板宽
Externí odkaz:
https://doaj.org/article/7ed10f62b22b43eab7020c790e951cfd
Publikováno v:
Jianzhu Gangjiegou Jinzhan, Pp 25-31 (2002)
相对于传统SRC梁接SRC柱的梁柱接头而言,本研究采用钢梁接SRC柱之接头型式,尝试利用SRC柱在劲度与抗压强度之优点,并避开SRC梁在施工上的不便,初步进行了两组大尺寸试体之反复载重试验,以
Externí odkaz:
https://doaj.org/article/c4df390abc154a2ba44656ff105be35c
Publikováno v:
Jianzhu Gangjiegou Jinzhan, Vol (2005)
扇形焊接开孔为进行梁翼板全渗透开槽焊接时所需之工作孔。然而,实尺寸梁柱接头试验证实,传统梁腹板锁螺栓及梁翼板全渗透焊接之钢构造梁柱接头,常于扇形开孔处发生突然性之脆性破坏
Externí odkaz:
https://doaj.org/article/aa25d64f235741898e8c757f79b5040f
Slip Coefficient and Creep Behavior of Bolted Slip-Critical Connections with Thermal Sprayed Coating
Autor:
Chang, Cheng, 張誠
107
This research explore the application of thermal sprayed coating to slip-critical joints to increase the slip coefficient and confirm the slip-critical joints with coating satisfying the creep requirements. The experiment consisted of two se
This research explore the application of thermal sprayed coating to slip-critical joints to increase the slip coefficient and confirm the slip-critical joints with coating satisfying the creep requirements. The experiment consisted of two se
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/zx97xc
Autor:
Li, Si-Wei, 李思維
107
In this study, thermal sprayed coating was applied to the faying surface of steel plates in order to increase the slip coefficient and enhance the slip resistance of the slip-critical joint. Moreover, this study aims to explore the effect of
In this study, thermal sprayed coating was applied to the faying surface of steel plates in order to increase the slip coefficient and enhance the slip resistance of the slip-critical joint. Moreover, this study aims to explore the effect of
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/b86p6u
Autor:
Ku, Fang-Yu, 顧芳瑀
106
The experience of large-scale fire and research results showed that the strength and stiffness of steel members get weaken due to high temperature, which is one of the main reason of building collapse. Standard fire tests are expensive to be
The experience of large-scale fire and research results showed that the strength and stiffness of steel members get weaken due to high temperature, which is one of the main reason of building collapse. Standard fire tests are expensive to be
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/td4c7q
Autor:
Hung, Cheng-Hung, 洪政鴻
106
This research has been conducted experimentally to investigate the fire behavior of different types of beam-to-column connections using high-strength steel, and theoretically to evaluate the deformation of the specimens under elevated temper
This research has been conducted experimentally to investigate the fire behavior of different types of beam-to-column connections using high-strength steel, and theoretically to evaluate the deformation of the specimens under elevated temper
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/uf9p37
Autor:
Wu, Chien-Yi, 吳建宜
106
This research was conducted to investigate the mechanical behavior of exposed column base connections subjected to axial compression and flexure through finite element analysis, and further to clarify the complex mechanism within the connect
This research was conducted to investigate the mechanical behavior of exposed column base connections subjected to axial compression and flexure through finite element analysis, and further to clarify the complex mechanism within the connect
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/h98au6