Zobrazeno 1 - 10
of 110
pro vyhledávání: '"Łukasz Drobiec"'
Publikováno v:
Archives of Civil Engineering, Vol vol. 70, Iss No 2, Pp 323-342 (2024)
The article presents the results of a detailed experimental campaign including a compressive strength test, three- and four-point bending test (3PBT and 4PBT, respectively) of polymer fiber reinforced concrete with the addition of metakaolin. The com
Externí odkaz:
https://doaj.org/article/ff44e2e83e364888aec1d779be07c939
Publikováno v:
Budownictwo i Architektura, Vol 19, Iss 3 (2020)
This paper describes results from studies on the effects of superficial strengthening with FRCM system on compressive strength of autoclaved aerated concrete (AAC) masonry. Tests were carried out on models without any strengthening, strengthened at o
Externí odkaz:
https://doaj.org/article/ddf3e4c2c5324b8d81e4fb2db6b49e3b
Autor:
Jakub Zając, Łukasz Drobiec, Radosław Jasiński, Mirosław Wieczorek, Wojciech Mazur, Krzysztof Grzyb, Artur Kisiołek
Publikováno v:
Applied Sciences, Vol 11, Iss 21, p 10354 (2021)
In this study, qualitative tests were carried out to compare the behaviour of selected slabs exposed to short- and long-term loading. Full-scale models of the half-slab and hollow-core slab with dimensions of 6.30 m × 6.30 m, built of four different
Externí odkaz:
https://doaj.org/article/c36d54aadc6543e9b45f770b16360656
Publikováno v:
Applied Sciences, Vol 10, Iss 16, p 5446 (2020)
This paper describes results of numerical analyses of reinforced lintels made of autoclaved aerated concrete built into unconfined walls and walls confined with reinforced concrete. The combination of the Menétrey–Willam elastic-plastic failure cr
Externí odkaz:
https://doaj.org/article/1f8f3e0d12c34fb291c8842b4eef4df2
Publikováno v:
Applied Sciences, Vol 10, Iss 13, p 4645 (2020)
Detecting non-metallic reinforcement made of FRP (Fibre Reinforced Polymers) can be problematic, particularly at the stage of work inspection and constructional evaluation. In contrast to steel reinforcement, detecting non-metallic reinforcement is d
Externí odkaz:
https://doaj.org/article/1da3d401a53e4e5d8bebf901659c2bc1
Publikováno v:
Applied Sciences, Vol 10, Iss 8, p 2642 (2020)
The article describes the results of numerical analyses and traditional calculations of the heat transfer coefficient in ceilings with a complex cross-section, and with materials of varying density built-in inside the cross-section. Prefabricated pre
Externí odkaz:
https://doaj.org/article/3e0f718df7bb4051b7b191bc85561527
Publikováno v:
Engineering Structures and Technologies, Vol 8, Iss 4 (2016)
This article examines masonry as the composite material. Factors affecting the mechanical deformation characteristics of masonry bed joints are reviewed. The strength and deformation characteristics of bed joints under the influence of changing morta
Externí odkaz:
https://doaj.org/article/c76258acd7c14a0bb0b9876272422a8e
Autor:
Łukasz Drobiec
Publikováno v:
MATERIAŁY BUDOWLANE. 1:28-32
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6c842b0bb6330ace10beeb598e38d836
https://doi.org/10.15199/33.2023.04.06
https://doi.org/10.15199/33.2023.04.06
Autor:
Julia Blazy, Łukasz Drobiec
Publikováno v:
MATERIAŁY BUDOWLANE. 1:46-50
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f76605d73b62b70c4894d5f3929f87a0
https://doi.org/10.15199/33.2022.09.02
https://doi.org/10.15199/33.2022.09.02