Zobrazeno 1 - 10
of 17
pro vyhledávání: '"Øyvind Eriksen"'
Publikováno v:
BioResources, Vol 7, Iss 3, Pp 3690-3700 (2012)
Microfibrillated cellulose (MFC), TEMPO-pretreated MFC, and hybrid polymer/MFC mix were used for the production of layered films with interesting properties for application in food packaging. The series of samples were prepared from MFC (base layers)
Externí odkaz:
https://doaj.org/article/ac116acf8d654384a5da2e1be9e8e216
Publikováno v:
Nordic Pulp & Paper Research Journal. 30:443-451
Although mechanical pulp can be considered as a potential raw material for preparation of microfibrils, suitable pre-treatment methods have been missing. Consequently, the objectives of this study ...
Publikováno v:
Nordic Pulp & Paper Research Journal. 29:344-355
To evaluate the causes behind the formation of colour in mill systems, the effect of different process waters on the optical properties of hydrogenperoxide bleached Norway spruce mechanical pulp during storage was studied. The influence of process wa
Publikováno v:
Nordic Pulp & Paper Research Journal. 29:356-366
The discolouration of hydrogen-peroxide bleached Norway spruce mechanical pulp during storage in mill systems was studied and the contributions of process water, iron and dyes were evaluated over the visible spectrum. Washing of the pulp made it less
Publikováno v:
Cellulose. 20:1167-1174
The barrier properties of microfibrillated cellulose (MFC) films were improved by heterogeneous gas-phase esterification using various combinations of trifluoroacetic acid anhydride, acetic acid and acetic anhydride. The temperature, reagent ratio an
Publikováno v:
Nordic Pulp & Paper Research Journal. 27:798-805
This study shows that wet-pressing TMP and DIP with a shoe press pulse may yield similar afterpress solids, provided that an adequate shoe pulse length with similar pressure profile is applied. A wet web with more porous structure in the sheet dewate
Publikováno v:
Nordic Pulp & Paper Research Journal. 27:790-797
The dewatering ability and wet sheet structure after pressing was studied using a dynamic wet pressing simulator in combination with electron microscopy and image analysis. Deinked pulp (DIP) that contains 5% ash dewaters more easi ly than thermomech
Publikováno v:
Cellulose. 19:1115-1123
2,2,6,6-Tetramethylpiperidine-1-oxyl radical (TEMPO)-oxidized cellulose nanofibers were prepared from two kraft pulps (Norway spruce and mixed eucalyptus) using the TEMPO/NaBr/NaClO system at pH 10 and 22 °C. After reaction and mechanical treatment,
Publikováno v:
Nordic Pulp & Paper Research Journal. 27:388-396
Different qualities of microfibrillated cellulose (MFC) were blended with thermomechanical pulp (TMP) and ground calcium carbonate (GCC) filler. The addition of MFC reduced the drainage of the pulp suspension but improved strength properties. Wet pre