Zobrazeno 1 - 10
of 22
pro vyhledávání: '"Shu-Ying Chen"'
Publikováno v:
Journal of Materials Engineering and Performance.
Autor:
Bing-yuan Han, Xiang-han Gao, Shu-ying Chen, Meng-qi Cong, Ren-xing Li, Xiao Liu, Wei-xing Hang, Fang-fang Cui
Publikováno v:
Tribology International. 175:107859
Publikováno v:
Journal of Materials Engineering and Performance. 28:3560-3566
The performance of the transition layer in a Cu/Al composite casting directly affects the quality of subsequent plastic deformation processing; however, there are no universal or standardized measurement indices for the performance of the transition
Publikováno v:
High Temperature Materials and Processes, Vol 38, Iss 2019, Pp 199-206 (2019)
In this study, Cu/Al composite castings were prepared using the pouring aluminum method, and the casting defects in the transition layer and their formation mechanism were investigated. Shrinkage cavities, shrinkage porosities, and cracks were easily
Publikováno v:
Materials & Design, Vol 193, Iss, Pp 108853-(2020)
In this study, solidification microstructure of fine primary silicon being uniformly distributed on single αAl matrix was obtained when adding Cu–9 wt%P alloy to an Al–10 wt%Si alloy melt or an Al–20 wt%Si alloy melt, stirring at 200 r/min for
Publikováno v:
Materials & Design, Vol 133, Iss, Pp 19-29 (2017)
The laser method was used to process dimples with different diameters and distances on ASTM 1045 steel substrates. Ni60 alloy powders were deposited on the textured substrates using atmosphere plasma spray technology. Single sprayed particles were co
Publikováno v:
High Temperature Materials and Processes, Vol 36, Iss 9, Pp 885-890 (2017)
In this study, a Cu/Al composite ingot was prepared by casting aluminum method, and the effects of the Cu concentration distribution in the transition layer on the solidification microstructure were examined during the recombination process of solid
Publikováno v:
Metallurgical and Materials Transactions A. 48:1551-1561
The morphological changes of the δ-ferrite/γ interphase boundary have been observed in situ with a high-temperature confocal scanning laser microscope (HTCSLM) during δ/γ transformations (δ → γ and γ → δ) of Fe-0.06 wt pct C-0.6 wt pct Mn
Publikováno v:
Journal of Materials Research. 31:3766-3776
Four types of W-doped graphite-like carbon (W-GLC) films were deposited under different W target currents by magnetron sputtering method. The effects of W content on the microstructure and properties of the W-GLC films were analyzed via various chara
Publikováno v:
Materials & Design, Vol 110, Iss, Pp 332-339 (2016)
Fe-based amorphous metallic coatings with a nominal composition of Fe48Cr15Mo14C15B6Y2 were fabricated by supersonic plasma spraying (SPS). The effects of the Ar flow rate and spraying power on the microstructure and amorphous content of the coatings