Zobrazeno 1 - 10
of 23
pro vyhledávání: '"Ru, Peng"'
Publikováno v:
Journal of Mechanics in Medicine and Biology. 21
The minimum detectable difference (MDD) at various beats/min (BPM) of CT angiography (CTA) was evaluated using an oblique V-shape line gauge and poly methyl methacrylate (PMMA) phantom in this study. The customized phantom with the size of [Formula:
Autor:
Rachid M'Saoubi, Volodymyr Bushlya, Ville Akujärvi, Zhe Chen, David Gustafsson, Ru Peng, Jan-Eric Ståhl, Henrik Persson, Jinming Zhou
Publikováno v:
Procedia CIRP. 71:215-220
AD730TM is a novel superalloy developed for the hot section part in aero engine and gas turbine machinery with enhanced performance. The material is characterized by its excellent high temperature properties for being an alloy possible to manufacture
Publikováno v:
Journal of Physics: Conference Series. 1948:012191
In this study, the PVDF-BTO composite film was prepared by the casting method. Through FTIR, SEM and other phase structure and microstructure analysis of the composite film, it was found that the introduction of BTO can promote the growth of β-PVDF.
Autor:
Shrikant V. Joshi, Pimin Zhang, Paria Karimi, Ru Peng, Joel Andersson, Esmaeil Sadeghimeresht, Lars Pejryd
Publikováno v:
The Minerals, Metals & Materials Series ISBN: 9783319894799
Oxidation of Alloy 718 manufactured by electron beam melting (EBM) process has been undertaken in ambient air at 650, 700, and 800 °C for up to 168 h. At 800 °C, a continuous external chromia oxide enriched in (Cr, Ti, Mn, Ni) and an internal oxide
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f592a73ea730db3d1a7d83e0044caa39
https://doi.org/10.1007/978-3-319-89480-5_13
https://doi.org/10.1007/978-3-319-89480-5_13
Autor:
Krister Svensson, Mattias Thuvander, Ina Yadroitsava, Pavel Krakhmalev, Igor Yadroitsev, Ru Peng, Gunnel Fredriksson
Publikováno v:
Metals, Vol 8, Iss 8, p 643 (2018)
This article overviews the scientific results of the microstructural features observed in 316 L stainless steel manufactured by the laser powder bed fusion (LPBF) method obtained by the authors, and discusses the results with respect to the recently
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::900648661be3733518432d673259a5d6
http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-151057
http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-151057
Publikováno v:
Advanced Materials Research. 1088:495-499
A new phthalocyanine Zinc(II) bearing benzyl ether dendritic substituents with nitro-terminal group: tetra-{3,5-[di-(4-nitro benzyloxy) benzyloxy]} Phthalocyanine Zinc(II) (ZnPc(NO2)8), was synthesis and characterized by IR, 1HNMR, MALDI-TOF-MS and U
Publikováno v:
Applied Mechanics and Materials. :346-353
A mathematical model was established and validated to predict the microbubble diameter when it departing from the carbon paper and moving into the channel of μDMFC. Single bubble behaviors were studied using the model, which took the gas velocity, l
Publikováno v:
HTM Journal of Heat Treatment and Materials. 69:106-113
Graphite morphology in cast iron strongly affects the mechanical properties such as: Young's modulus, tensile/compressive strength and cyclic mechanical behaviour. In this study, pearlitic compact graphite iron (CGI) and grey cast iron (GI) have been
Publikováno v:
HTM Journal of Heat Treatment and Materials. 69:38-45
Grey cast iron and compacted graphite iron with a pearlitic matrix are investigated in this study after shot peening using twelve unique combinations of parameters, namely shot size, peening intensity and coverage, followed by residual stress measure
Publikováno v:
Residual Stresses 2016.
The present study highlights the effect of cooling and post-machining surface treatment of shot peening on the residual stresses and corresponding fatigue life of milled superalloy Inconel 718. It ...