Zobrazeno 1 - 10
of 21
pro vyhledávání: '"Shu-Ying Chen"'
Autor:
Jiajie Kang, Hai-dou Wang, Zhi-guo Xing, Guo-zheng Ma, Jin Zi'ang, Shu-ying Chen, Liu Ming, Li-na Zhu
Publikováno v:
Journal of Thermal Spray Technology. 29:489-499
Thermal spraying aluminum coatings have been widely used in the corrosion protection of mild steel in seawater. In this study, high-efficiency supersonic plasma spraying (HESP) and oxygen–acetylene flame spraying (FS) were used to prepare aluminum
Publikováno v:
International Journal of Materials Research. 110:1066-1073
The effects of in-situ AlP formation on the solidification process of an Al-20 %Si alloy were studied by examining the change law of the solidification microstructures after the addition of Cu–P alloy to the melt and stirring. During the early stag
Autor:
He Pengfei, Zhi-yong Wu, Bin-shi Xu, Ding Shuyu, Hai-dou Wang, Guo-zheng Ma, Tang Ling, Xi Chen, Shu-ying Chen
Publikováno v:
Journal of Thermal Spray Technology. 28:1636-1650
Internal rotating plasma spraying has been widely used in industrial applications to enhance performance properties and prolong the service life of internal components, such as gas turbines, engine blocks, and oil pipelines. As it is difficult to dis
Autor:
Guo-zheng Ma, Ding Shuyu, Shu-ying Chen, Wang Haidou, He Pengfei, Tang Ling, Yu-cheng Xiong, Liu Ming, Jiajie Kang
Publikováno v:
Surface and Coatings Technology. 374:625-633
NiCrBSi alloy coatings were fabricated via internal rotating plasma spraying (IRPS) inside the cylinder liner and in open space using the same processing parameters. The effects of spraying condition on the microstructural, mechanical and tribologica
Publikováno v:
Journal of Thermal Spray Technology. 28:1308-1317
Hypereutectic Al-Si alloy is an ideal surface strengthening material for aluminum alloy cylinder body. However, the coarse eutectic silicon phase and primary silicon particles in Al-Si alloys prepared by traditional methods lead to poor mechanical pr
Publikováno v:
Surface and Coatings Technology. 344:43-51
A micro scratch test was performed to evaluate the adhesion strength of plasma sprayed Fe-based amorphous splats deposited on a mirror polished steel substrate preheated at different temperatures. The lateral force (LF), penetration depth (PD) and ac
Publikováno v:
Journal of Thermal Spray Technology. 26:1257-1267
The effects of the Ar flow rate and spraying power of a supersonic plasma spraying process on the microstructures and amorphous phase contents of Fe48Cr15Mo14C15B6Y2 amorphous coatings were systematically investigated. The tribological properties of
Autor:
He Pengfei, Liu Ming, Jiajie Kang, Shu-ying Chen, Guo-zheng Ma, Hai-dou Wang, Li Guolu, Zhao Qin
Publikováno v:
Coatings, Vol 9, Iss 7, p 431 (2019)
In order to achieve better knowledge of the thermal barrier coatings (TBCs) by supersonic atmospheric plasma spraying (SAPS) process, an experimental study was carried out to elaborate the physicochemical properties of particles in-flight during the
Publikováno v:
Ceramics International. 42:13319-13325
Conventional thermal-spray TiO2 ceramic coating is widely used in machinery industry and captures much attention over the years. Nevertheless, additional improvement of mechanical properties of the coating should be desirable due to its relatively lo
Publikováno v:
Transactions of Nonferrous Metals Society of China. 26:2247-2256
The Cu–Al composite casts were prepared by the method of pouring molten aluminum. The solidification process and the microstructure of the transition layer were investigated during the recombination process of the liquid Al and the solid Cu. The re