Zobrazeno 1 - 10
of 18
pro vyhledávání: '"Xiaoliang Jin"'
Autor:
Fazlali, Mohammadreza1 fazlali@mail.ubc.ca, Xiaoliang Jin1 xjin@mech.ubc.ca
Publikováno v:
Journal of Manufacturing Science & Engineering. Sep2023, Vol. 145 Issue 9, p1-25. 25p.
Publikováno v:
Precision Engineering. 72:144-157
The tuned mass damper (TMD) has been used in machining processes for reducing forced vibration, suppressing chatter, and improving machined surface quality. In micro-milling process, the tiny size of the cutting tool-tip and the high rotating speed b
Autor:
Xiaoliang Jin, David Yan
Publikováno v:
Journal of Materials Engineering and Performance. 29:4063-4074
Ti-5553 (Ti-5Al-5Mo-5V-3Cr-0.5Fe) is a recently commercialized near-β titanium alloy employed in large-section forging of Boeing 787 landing gear. The machinability of Ti-5553 is low owing to its high strength at elevated temperature, low thermal co
Publikováno v:
Manufacturing Letters. 22:19-24
The direct laser-assisted machining (DLAM) technique is introduced to improve the CFRP machining process. The DLAM technique applies focused laser at the tool edge through a sapphire tool. A fibre laser with 4.3 W power was used to have the desired t
Publikováno v:
Precision Engineering. 57:203-210
Self-excited vibration, widely referred to as chatter, has always been a limitation and challenge in machining. To suppress milling chatter vibration and improve surface finishes, a novel spindle system is proposed in this study. A noncontact electro
Publikováno v:
Journal of Manufacturing Processes. 35:40-50
Bulk metallic glasses (BMGs) are a relatively new group of metallic alloys with amorphous microstructure. BMGs have been increasingly used in industrial applications due to their high strength and high corrosion resistance. The microstructural evolut
Publikováno v:
CIRP Annals. 67:193-196
Bulk metallic glasses (BMGs) are amorphous metallic alloys with high strength and hardness. This paper discusses the machining process of Zr-BMG using a transparent sapphire tool with direct laser assistance. The laser beam passes through the tool an
Autor:
Xiaoliang Jin, Naresh Kumar Maroju
Publikováno v:
Procedia Manufacturing. 26:317-328
Bulk metallic glasses (BMGs) are metallic materials without crystalline microstructure. The mechanism of chip formation in machining BMGs is different from crystalline metal alloys due to their amorphous phase and mechanical properties. This paper pr
Publikováno v:
Journal of Materials Processing Technology. 249:96-107
Graphene and carbon nanotubes (CNTs) have been used in polymeric nanocomposites for improved mechanical, electrical, thermal and gas barrier properties. As the major applications of these relatively new materials are expected to be in the micro/meso-
Publikováno v:
Journal of Manufacturing Science and Engineering. 141
Linear tool path segments of computer numerical control (CNC) machine tools need to be smoothed and interpolated in order to guarantee continuous and steady machining. However, because of the highly nonlinear relation between arc lengths and spline p