Zobrazeno 1 - 10
of 24
pro vyhledávání: '"Sun, Jin"'
Publikováno v:
Advances in Materials Science and Engineering, Vol 2019 (2019)
The current code specifies a minimum torsional reinforcement ratio to prevent possible brittle failure after torsional cracking in concrete members. However, since there are many researches, in which even the concrete members with the minimum torsion
Publikováno v:
Applied Sciences, Vol 11, Iss 506, p 506 (2021)
Applied Sciences
Volume 11
Issue 2
Applied Sciences
Volume 11
Issue 2
In this study, experiments and numerical analyses were carried out to examine the flexural and shear performance of a double composite wall (DCW) manufactured using a precast concrete (PC) method. One flexural specimen and three shear specimens were
Publikováno v:
Applied Sciences
Volume 9
Issue 17
Applied Sciences, Vol 9, Iss 17, p 3503 (2019)
Volume 9
Issue 17
Applied Sciences, Vol 9, Iss 17, p 3503 (2019)
This study suggests a novel beam-column element formulation that utilizes an equilibrium-driven shear stress function. The beam shear is obtained from the bi-axial states of micro-planes, through matrix condensation and zero vertical traction assumpt
Publikováno v:
Applied Sciences
Volume 11
Issue 4
Applied Sciences, Vol 11, Iss 1569, p 1569 (2021)
Volume 11
Issue 4
Applied Sciences, Vol 11, Iss 1569, p 1569 (2021)
In this study, experimental tests were performed to evaluate the shear performance of encased steel truss (EST) composite girders that can resist loads at construction and composite stages. Four full-scale EST composite girders were fabricated, where
Publikováno v:
Applied Sciences, Vol 10, Iss 5, p 1709 (2020)
Applied Sciences
Volume 10
Issue 5
Applied Sciences
Volume 10
Issue 5
Prestressed hollow core slabs (PHCSs) have commonly been applied to long-span structures, due to their excellent flexural capacity and deflection control performance. However, in quite a few cases, the web-shear strength at member ends subjected to h
Publikováno v:
Applied Sciences, Vol 9, Iss 22, p 4946 (2019)
Applied Sciences
Volume 9
Issue 22
Applied Sciences
Volume 9
Issue 22
Half precast concrete slabs with inverted multi-ribs (Joint Advanced Slab, JAS), which enhance composite performance between slabs by introducing shear keys at connections between the slabs and improve structural performance by placing prestressing t
Autor:
Sun Jin Kim, Byung Jin Cho, Ji Seon Shin, Hyeongdo Choi, Keon Jae Lee, Ju Hyung We, Han Eol Lee, Yongjun Kim
Publikováno v:
ACS nano. 10(12)
Flexible thermoelectric generators (f-TEGs) are emerging as a semipermanent power source for self-powered sensors, which is an important area of research for next-generation smart network monitoring systems in the Internet-of-things era. We report in
Publikováno v:
Japanese Journal of Applied Physics. 47:6934-6937
AlxTi1-xOy (ATO) films were deposited by plasma enhanced atomic layer deposition (PEALD). In the deposition, it was possible to tailor the refractive index and the thickness of films by adjusting the number of cycles used for Al2O3 and TiO2 sublayers
Publikováno v:
Japanese Journal of Applied Physics. 46:738-743
VO2 thin films were successfully grown on sapphire and SiO2/Si substrates by the sol–gel process. The VO2 phase was well formed during simplified low pressure annealing in oxygen. The films prepared on sapphire directly crystallized to the VO2 phas
Autor:
Chang−Wook Han, Sun Jin Yun, In Jae Chung, Sang−Myeon Han, Jung Wook Lim, Joong−Hyun Park, Min-Koo Han, Ki Yong Kim
Publikováno v:
Japanese Journal of Applied Physics. 45:4365-4369
Hydrogenated microcrystalline silicon (µc-Si:H) film was fabricated by inductively coupled plasma–chemical vapor deposition (ICP–CVD) at 150 °C on ZrO2 gate dielectric which was made by atomic layer deposition (ALD) method. µc-Si:H film with v