Zobrazeno 1 - 10
of 439
pro vyhledávání: '"550"'
Autor:
Yan Wu, Nabeela Akbar, Yueming Xing, Baoyuan Wang, M.A.K. Yousaf Shah, Bin Zhu, Sajid Rauf, Naveed Mushtaq
Publikováno v:
International Journal of Hydrogen Energy. 45:27501-27509
As an electrolyte, enough ionic conductivity, either proton (H+) or oxide (O2−) conduction, has demanded the better performance of low-temperature (especially below 550 °C) solid oxide fuel cell (LT-SOFCs). Notably, that either conductivity, highe
Publikováno v:
International Journal of Hydrogen Energy. 45:29123-29130
A well-connected and high-porosity current collector layer fabricated at a low temperature of 550 °C is designed for metal-supported solid oxide fuel cells (SOFCs). Reduced Mn1.5Co1.5O4 (MCO) powders are used as the binder through the reforming of M
Publikováno v:
Applied Surface Science. 389:930-941
The oxidation resistance for the heat affected zone (HAZ) and base metal of 9 wt.% Cr heat resistant steel in 550 °C lead-bismuth eutectic has been investigated. The oxide film presents a three-layer structure. The outer layer is Fe3O4 while the inn
Publikováno v:
Soviet Powder Metallurgy and Metal Ceramics. 14:367-369
1. A study was made of the ductility of semifinished products in 6–15% alumina SAP materials at temperatures of 20–550°C. The elongation of SAP was found to vary anomalously as a function of temperature. It was established that the elongation an
Publikováno v:
Materials at High Temperatures
Scopus-Elsevier
Scopus-Elsevier
The microstructural evolution of the alumina-zirconia mixed zone in a NiCoCrAlY-based electron beam physical vapor deposited (EB-PVD) yttria partially stabilized zirconia (Y-PSZ) thermal barrier coating (TBC) system from the as-coated condition into
Publikováno v:
Journal of Non-Crystalline Solids
Liquid immiscibility is common in glass-forming oxide melts, and interfacial tension between the conjugate liquid phases is an important property that determines the kinetics of phase separation. Here we present, to the best of our knowledge, the fir
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::214ee96ef50dd4a70c844b6dc069c008
https://gfzpublic.gfz-potsdam.de/pubman/item/item_240630
https://gfzpublic.gfz-potsdam.de/pubman/item/item_240630
Publikováno v:
Scopus-Elsevier
28 th International Cocoa Beach Conference and Exposition on Advanced Ceramics & Composites (Cocoa Beach Florida 2004)
28 th International Cocoa Beach Conference and Exposition on Advanced Ceramics & Composites (Cocoa Beach Florida 2004)
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::ea5acb029e225f675950defe33ecac41
https://elib.dlr.de/17642/
https://elib.dlr.de/17642/
Publikováno v:
Journal of Nanoscience and Nanotechnology. 21:1784-1788
We have studied the oxidation behaviors of aluminum (Al) nanopowders with different particle sizes using a real-time synchrotron X-ray scattering during annealing in air. The Al nanopowders with small particle size of 78 nm at room temperature (RT) w
Autor:
Baoyuan Wang, Kan Rong Lee, Chen Xia, Jhe Wei Jhuang, Sheng Wei Lee, I. Ming Hung, Chung Jen Tseng
Publikováno v:
International Journal of Hydrogen Energy. 46:9767-9774
Low-temperature solid oxide fuel cells (LT-SOFCs) have recently gained enormous attention worldwide with a new research trend focusing on single layer fuel cells (SLFC), which have better cell performance than traditional SOFCs at low operating tempe
Publikováno v:
International Journal of Hydrogen Energy. 46:9927-9937
The interfacial properties of electrolyte materials have a crucial impact on the ionic conductivity of solid batteries and solid oxide fuel cells. Here we construct cuprospinel CuFe2O4 (CFO)–ZnO composite as a functional electrolyte for fuel cell d