Zobrazeno 1 - 7
of 7
pro vyhledávání: '"Kohji Kato"'
Publikováno v:
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C. 52:2732-2738
Fretting damage morphology was investigated for SUS 304 stainless steel in a vacuum (4×10-3Pa) by varying the number of fretting cycles, normal load, and slip amplitude, and the generation of surface cracks was examined by SEM. The condition for the
Publikováno v:
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C. 52:2503-2507
Ceramic is a better material than metal to use in the corrosive environment or at an elevated temperature. But ceramic is very brittle. Therefore the combined use of ceramic and metal is needed. A simple and sufficiently strong joining technique betw
Publikováno v:
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C. 53:908-915
Ceramic is a better material than metal to use in the corrosive environment or at an elevated temperature. But brittleness is a defect in ceramic. Therefore joining techniques between ceramic and metal are needed. We thought that shrinkage fit is one
Publikováno v:
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C. 52:3285-3291
Publikováno v:
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C. 52:2920-2924
In this paper, the deforming properties of the model asperity of SUS304 were researched experimentally at elevated temperatures when the asperity was flattened by a flat punch. The shape of the asperity was a two-dimensional wedge. The asperity angle
Autor:
Kohji Kato, T. Kayaba
Publikováno v:
A S L E Transactions. 24:164-174
The adhesive wear process was analyzed microscopically by successive observations in the SEM. Fractographic analysis of the transferred fragment was also conducted. Two modes of adhesive transfer were identified. In the first mode, successive slip oc
Publikováno v:
JSME international journal. 30:1319-1325
In the previous paper, experimental work was reported in which the crack generation during fretting in a vacuum was dependent on the slip amplitude and normal load. In this paper, the condition of the crack generation is considered. The tensile stres