Zobrazeno 1 - 10
of 53
pro vyhledávání: '"Xiaoyan Wang"'
Publikováno v:
Materials Science Forum. 1023:45-52
After solid solution treatment at 1335°C for 4 hours and cooling to room temperature at different rate, the nickel-based single crystal superalloy were made into three kinds of nickel-based single crystal superalloy materials containing different si
Publikováno v:
Petroleum Exploration and Development, Vol 48, Iss 1, Pp 169-178 (2021)
Taking reservoir rocks and fluids of the Daqing, Dagang and Changqing oilfields as research objects, the EOR mechanisms and technical approach of polymer flooding were discussed. By comparing the displacement performances of ordinary polymer, glycero
Autor:
Liujia Ma, Xiuxia Zuo, Ya-Jun Cheng, Xiaoyan Wang, Jianqiang Meng, Jin Zhu, Ying Pan, Yonggao Xia, Qing Ji
Publikováno v:
Langmuir. 36:2003-2011
Silicon anodes have attracted much attention owing to their high theoretical capacity. Nonetheless, an inevitable and enormous volumetric expansion of silicon in the lithiated state restrained the development of the silicon anode for lithium-ion batt
Autor:
Xiaoming Liu, Zhenfei Li, Jianling Guo, Ruqian Ding, Xiaoyan Wang, Jiachen Sun, Xin Ren, Lizhi Wen, Donghui Lv, Guangchuan Liang
Publikováno v:
Ionics. 26:2293-2301
The effect of compaction density on the performance of LiFePO4/C battery was studied. From the perspective of the distribution of each material of LiFePO4/C electrode pole pieces, the traditional oil-based electrode manufacturing process was used. Th
Autor:
Zhenfei Li, Jiachen Sun, Yi Zheng, Weichao Tian, Xin Ren, Fang Wang, Liwei An, Xiaoyan Wang, Lizhi Wen, Li Wang, Guangchuan Liang
Publikováno v:
Ionics. 26:691-702
Increasing the areal capacity of electrodes in lithium-ion batteries (LIBs) is one of the effective ways to increase energy density due to increased volume fraction of active materials. However, the disassembly of cylindrical lithium iron phosphate (
Publikováno v:
Metals, Vol 11, Iss 623, p 623 (2021)
Metals
Volume 11
Issue 4
Metals
Volume 11
Issue 4
Taking nickel-based single crystal superalloy DD6 as the research object, different degrees of creep damage were prefabricated by creep interruption tests, and then the creep damage was repaired by the restoration heat treatment system of solid solut
Publikováno v:
Surface and Coatings Technology. 363:87-94
Mg-Zn-Ca bulk metallic glasses (BMGs) have been regarded as new biodegradable materials for orthopedic implants, while size constrains limit their biomedical applications. In this study, Mg-based amorphous layers with the nominal composition of Mg65Z
Publikováno v:
Journal of Non-Crystalline Solids. 500:205-209
Size constrains of traditional rapid solidification processes for fabrication of Mg-Zn-Ca bulk metallic glasses have limited their biomedical applications as implants. In this work, large-sized Mg65Zn30Ca5 amorphous coating was fabricated by laser re
Publikováno v:
Composites Part B: Engineering. 230:109511
TiC crystals are an ideal and irreplaceable reinforcement in metal matrix composites (MMCs). The C, Ti vacancies and dislocations provide elemental diffusion channels, and thermal processing provides sufficient activation energy to induce a special r
Autor:
Xiaoyan Wang, Huigang Shi, Jianwen Le, Shaopeng Li, Weijie Lu, Guangfa Huang, Yuanfei Han, Minhan Fang
Publikováno v:
Composites Communications. 29:101002
This work creatively planted nano-TiB fibers (10∼50 nm in width) as a novel ultra-fine network in pre-alloyed Ti-composite powder based on the rapid eutectic reaction method, constitutional supercooling would limit the ultra-fine network skeletons