Zobrazeno 1 - 10
of 11
pro vyhledávání: '"Mathieu Hautefeuille"'
Autor:
Francisco M. Sánchez-Arévalo, J. A. Benítez-Martínez, I. M. Garnica-Palafox, Mathieu Hautefeuille, Genaro Vázquez-Victorio
Publikováno v:
Journal of Materials Science. 56:1-20
We demonstrate that semi-interpenetrating polymeric networks are obtained by blending synthetic and natural polymers such as poly(dimethylsiloxane) (PDMS), poly(vinyl alcohol) (PVA), and chitosan (CS) crosslinked with glutaraldehyde (GA) or genipin (
Publikováno v:
Field Guide to Optoelectronics and Photonics
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::def9a6bf4ae1edc2f0ba43e916198214
https://doi.org/10.1117/3.2595887.ch21
https://doi.org/10.1117/3.2595887.ch21
Autor:
Beatriz Díaz-Bello, Daniel Pérez-Calixto, Genaro Vázquez-Victorio, Nathalia Serna-Márquez, Ana Ximena Monroy-Romero, Diego Zamarrón-Hernández, Mathieu Hautefeuille
Publikováno v:
ACS biomaterials scienceengineering. 5(9)
Polyacrylamide (PAA) hydrogels are now widely used in mechanobiology because the well-defined available protocols allow a robust and reproducible control of substrate stiffness within a physiological range. However, several assays require hydrogels i
Autor:
A. Reyes Contreras, O. Olea Mejia, A. Esparza García, M. A. Camacho López, Mathieu Hautefeuille
Publikováno v:
Applied Surface Science. 336:212-216
In this work, we present results on texturing a 500 nm thick bismuth film, deposited by sputtering onto a glass slide using a low-cost homemade, near-infrared pulsed laser platform. A 785 nm laser diode of a CD–DVD pickup head was precisely focused
Autor:
Luis Manuel León Rossano, Lucia Cabriales, Juan Carlos Castro Alcántara, Mathieu Hautefeuille, Mariana Cerda Zorrilla
Publikováno v:
Beilstein Journal of Nanotechnology
Beilstein Journal of Nanotechnology, Vol 6, Iss 1, Pp 744-748 (2015)
Beilstein Journal of Nanotechnology, Vol 6, Iss 1, Pp 744-748 (2015)
We present two simple alternative methods to form polymer-derived carbon nanodomains in a controlled fashion and at low cost, using custom-made chemical vapour deposition and selective laser ablation with a commercial CD-DVD platform. Both processes
Autor:
Mariel Cano-Jorge, Lucia Cabriales, Francisco Páez-Larios, Mathieu Hautefeuille, Tatiana Fiordelisio, Edgar Jiménez-Díaz, Genaro Vázquez-Victorio, Aarón Cruz-Ramírez, Diego Zamarrón-Hernández
Publikováno v:
Micromachines
Volume 10
Issue 9
Micromachines, Vol 10, Iss 9, p 576 (2019)
Volume 10
Issue 9
Micromachines, Vol 10, Iss 9, p 576 (2019)
Microfluidics has become a very promising technology in recent years, due to its great potential to revolutionize life-science solutions. Generic microfabrication processes have been progressively made available to academic laboratories thanks to cos
Autor:
O. Olea Mejia, Mathieu Hautefeuille, L. Romero Salazar, A. Esparza García, A. Reyes-Contreras
Publikováno v:
Scopus-Elsevier
We present experimental results about formation of microbumps in bismuth thin films using a low-cost laser processing technique. We observe that final results are strongly dependent of the irradiation parameters.
Publikováno v:
Scopus-Elsevier
A simple fabrication method for carbon paste electrode fabrication on acrylic substrate is presented. Carbon paste is used to fill micron-scale, laser-etched channels in the plastic for a low-cost alternative of microcircuits development on polymers
Autor:
Margarita Rivera, Reinher Pimentel-Domínguez, Lucia Cabriales, Enrique López-Moreno, Víctor Velázquez, Mathieu Hautefeuille, Juan Hernández-Cordero, Laura Oropeza-Ramos, Marcela Grether, María del Pilar Carreón-Castro
Publikováno v:
Lab on a chip. 13(24)
A simple and inexpensive alternative to high-power lasers for the direct fabrication of microchannels and rapid prototyping of poly-dimethylsiloxane (PDMS) is presented. By focusing the infrared laser beam of a commercial, low-power CD-DVD unit on ab
Autor:
Laura Oropeza-Ramos, A. Falcon, A. Macias, A. Torres, Mathieu Hautefeuille, S. Juarez, H. Gonzalez
Publikováno v:
2011 IEEE 24th International Conference on Micro Electro Mechanical Systems.
This paper reports a low cost rapid prototyping platform to culture cardiomyocyte tissue with embedded biocompatible stimulation electrodes based on micro-structured conductive PDMS. The polymeric platform was fabricated using conventional soft litho