Zobrazeno 1 - 10
of 1 170
pro vyhledávání: ''
Autor:
Zainal Arifin Ahmad, Muhammad Azwadi Sulaiman, Wannarat Chueangchayaphan, Mohd Shukri Mat Nor, Fathin Asila Mohd Pabli, Syifa’ Muhammad Sharifuddin
Publikováno v:
Polymer Bulletin. 79:9907-9923
The limited applicability of very high dielectric permittivity ceramic materials such as copper calcium titanium oxide, commonly known as CCTO (er = 100,000 at room temperature and nearly independent of frequency from 1 Hz to 1 MHz), could be improve
Publikováno v:
Polymer Bulletin. 79:8471-8485
Graphene oxide (GO) has been widely used as a multi-functional filler in various composites. In order to improve the properties of room temperature vulcanized (RTV) silicone rubber, the functionalized GO (FGO) was used as 2-dimensional filler with sh
Publikováno v:
Fibers and Polymers. 23:352-359
High-conductivity yarns with remarkable flexibility and sensitivity have great potential for application in manufacturing wearable electronics. However, the development of electronic textiles (E-textiles) is still limited by the insufficient extents
Publikováno v:
Fibers and Polymers. 22:3393-3403
The high performance carbon fibers could be obtained from wastes of CF/EP composites by thermal excitation of Cr2O3. Recycling experiment was designed by response surface method to investigate quantitative model, then quantitative relationship betwee
Publikováno v:
Polymer Bulletin. 79:6533-6545
Effect of tetrabromobisphenol A (TBBPA) as a flame retardant agent (FR) and recycled polyvinylchloride (r-PVC) as a self-extinguishing component on the thermal, mechanical, and flammability properties of recycled acrylonitrile–butadiene–styrene c
Autor:
Suchart Siengchin, Abdullah M. Asiri, Jiratti Tengsuthiwat, Anish Khan, Mohit Hemath, Hurija Dzudzevic-Cancar, Hadi M. Marwani, Sanjay Mavinkere Rangappa
Publikováno v:
Polymer Composites. 42:4897-4910
Publikováno v:
Polymer Science, Series D. 14:381-386
The behavior of adhesive joints of D16AT An. Ox. chrom. aluminum alloy, made with the use of epoxy and phenolic-rubber adhesives, while exposed to constant tensile load and climatic factors in humid subtropics, both in open air and under a canopy, wh
Publikováno v:
Fibers and Polymers. 22:3106-3119
In this paper, the alumina nitrile rubber was prepared by mechanical blending. The effects of different amount of alumina doping on tensile, tearing and tribological properties of nitrile rubber were studied and analyzed. The results show that the te
Autor:
B.D.S. Deeraj, Meera Balachandran, Karingamanna Jayanarayanan, Kuruvilla Joseph, P. Sarath Kumar
Publikováno v:
Polymer Bulletin. 79:5063-5084
In this work, the effect of inclusion of 0.5 to 2 wt% multiwalled carbon nanotubes (MWCNT) in epoxy on the performance of the epoxy-carbon fabric (CF) composites is analyzed. High-resolution transmission electron microscopy (HRTEM) correlated the dis
Enhanced mechanical properties and flame retardant of epoxy resin by using of GOPOS decorated MWCNTs
Autor:
Huong Vu Thi, Cuong Manh Vu
Publikováno v:
Polymer Bulletin. 79:4783-4799
In this study, the multi-wall carbon nanotubes (MWCNTs) were grafted with Octa (propyl glycidyl ether) polyhedral oligomeric silsesquioxane (GOPOS) to form GOPOS-G-MWCNTs prior to use as an additive for improving the mechanical and the flame-retardan