Zobrazeno 1 - 10
of 231
pro vyhledávání: ''
Autor:
Zainal Arifin Ahmad, Muhammad Azwadi Sulaiman, Wannarat Chueangchayaphan, Mohd Shukri Mat Nor, Fathin Asila Mohd Pabli, Syifa’ Muhammad Sharifuddin
Publikováno v:
Polymer Bulletin. 79:9907-9923
The limited applicability of very high dielectric permittivity ceramic materials such as copper calcium titanium oxide, commonly known as CCTO (er = 100,000 at room temperature and nearly independent of frequency from 1 Hz to 1 MHz), could be improve
Publikováno v:
ACS Sustainable Chemistry & Engineering. 9:15983-15994
The low energy density of polymer-based dielectrics greatly limits their application in electronic components. Constructing composites with two-dimensional ceramic fillers is considered an effectiv...
Publikováno v:
Journal of Nanoscience and Nanotechnology. 21:4964-4967
A Cu metal-ceramic filter composite with high thermal conductivity and a suitable thermal expansion coefficient was designed to be applied to high performance heat dissipation materials. The purpose of using the ceramic filler was to decrease the hig
Publikováno v:
Industrial & Engineering Chemistry Research. 60:13265-13271
A developed Rahaman model considering the interphase properties is proposed to estimate the dielectric permittivity of polymer–barium titanate (BT) nanocomposites. In this study, the ceramic BT nan...
Publikováno v:
Chemistry – An Asian Journal. 16:822-836
LaPO4 ceramic colorants were processed in the vibrant shades of green and brick red, and subsequently embedded in polymer resins for the fabrication of heat management coatings. The IR/UV shielding characteristics of these ceramic colorants and polym
Autor:
Mariko Takeda, Yasuhide Inoue, Makoto Tanimura, Akira Ito, Yasumasa Koyama, Fumio Munakata, Kentaro Yoshino
Publikováno v:
Journal of the Ceramic Society of Japan. 129:135-142
Publikováno v:
Polymer Bulletin. 78:5317-5336
Ferroelectric ceramic–polymer composites consisting of Poly Vinyledine Fluoride–Hexa Fluoro Propylene (PVDF-HFP) as polymer host and 0.5Ba(Zr0.2Ti0.8)O3−0.5(Ba0.7Ca0.3)TiO3 (BZT-BCT) ceramics as filler were prepared using solution casting techn
Autor:
Jasbir S. Hundal, Dae-Yong Jeong, Koppole C. Sekhar, Navneet Dabra, Venkateswarlu Annapureddy, Tarun Garg
Publikováno v:
Polymer Composites. 41:5305-5316
Autor:
Nguyen The Manh, Luong Nguyen Dai Triet, Yura Choi, Yonghyun Cho, Wook Ahn, Kwang Jae Lee, Namchul Cho
Publikováno v:
Molecular Crystals and Liquid Crystals. 707:118-125
The aim of this study was to evaluate the microstructure of polymer infiltrated zirconia ceramics. Zpex smile from Tosoh company was used as a starting material. Sintered zirconia ceramics blocks w...
Publikováno v:
Carbon. 164:215-223
In previous study, we reported that the addition of graphene oxide (GO) into geopolymer can significantly modified its rheology properties and make it 3D printable. However, the high concentration of GO employment limits the enhancement of mechanical