Zobrazeno 1 - 10
of 478
pro vyhledávání: '"Hong, Tao"'
Publikováno v:
Materials Science Forum. 1071:67-73
The effect of pre-stretching and under-aging treatment on microstructure and fatigue crack resistance of Al-4.1Cu-1.27Mg-0.47Mn-0.02Ti alloy has been investigated in present work. The results showed that the fatigue strength corresponding to 107 stre
Autor:
Hong Tao Wang, Chang Xing Ye, Yu Liu, Yi Ling Wu, Xiao Fei Tian, Xiao Qing Li, Xian Zheng Gong
Publikováno v:
Materials Science Forum. 1035:1102-1108
The ISO14046 water footprint evaluation method was used in this study to calculate the water shortage footprint and water degradation footprint in plate glass production, in order to improve the water efficiency and management level in the production
Publikováno v:
Solid State Phenomena. 318:39-47
In this work, molecular dynamics (MD) simulation was utilized in relation to access the thermal conductivity of UO2, PuO2 and (U, Pu)O2 in temperature range of 500–3000 K. Diffusion study on mixed oxide (MOX) was also performed to assess the effect
Publikováno v:
Key Engineering Materials. 881:65-70
In order to obtain the critical temperatures of energetic materials thermal reaction in different scales, a multi-scale thermal reaction test system has been developed. In this experiment, the measurement method of thermal diffusivity of energetic ma
Publikováno v:
Key Engineering Materials. 881:101-105
The nitration reaction is one kind of important reaction in many synthetic chemical reactions. The reaction with a high temperature releases a lot of heat and is easy to get out of control. The energetic materials is the main ingredients of the react
Autor:
Hong Tao Wang
Publikováno v:
Applied Mechanics and Materials. 893:89-94
In this paper, the performance of CCHP with optimal operation were investigated, and theimpact of the time-use-price were analyzed. The results shown that the operation cost can beobviously save with optimal operation strategy than the HET strategies
Publikováno v:
Materials Science Forum. 944:142-148
The fatigue life of 7050 Al alloy samples after different surface treatments, i.e., as-machined, anodizing, shot peening, and shot peening followed by anodizing, had been tested. The shot peening treatment specimens presented the longest average fati
Autor:
Hong Tao Zheng, Cheng Zhi Zhao, Xue Kai Yang, He Xin Zhang, Hong Pang, Zhi-Ming Li, Qiang Wang
Publikováno v:
Materials Science Forum. 936:164-170
In the scope of refractory material processed by spark plasma sintering development for structural applications in the core of future combustion chamber, Mo-TiC alloys and Mo-TiC-Cr alloys were sintered at 1700°C with a pressure of 30 MPa. Powders o
Autor:
Xiao Bo Bai, Qing Yu Chen, Xiao Chen, Wei Fu, Hong-Tao Wang, Hai Long Yao, Chao Yang, Gang Chang Ji
Publikováno v:
Solid State Phenomena. 281:552-557
In the present study, Cr3C2-NiCr and WC-Co coatings have been deposited using high velocity oxygen-fuel (HVOF) spray technology from five available powders with various bonding phase content or manufacturing process. The microstructure of coatings wa
Publikováno v:
Materials Science Forum. 913:406-415
A new efficient micro-arc oxidation technology was developed for AZ80 magnesium alloy, the treating time was shorten to 3 min compared to the conventional micro-arc oxidation process. The surface morphologies and cross section morphology of the coati