Zobrazeno 1 - 10
of 3 010
pro vyhledávání: '"0103 physical sciences"'
Publikováno v:
IET Electric Power Applications, Vol 16, Iss 1, Pp 68-85 (2022)
Recently, the reluctance actuator has attracted great attention to replace the Lorentz actuator in the next generation of wafer scanners in semi‐conductor lithography machines. The reluctance actuator has a non‐linear position‐force characteris
Publikováno v:
High Voltage
High Voltage, IET, 2021, ⟨10.1049/hve2.12105⟩
High Voltage, Vol 6, Iss 6, Pp 1069-1078 (2021)
High Voltage, IET, 2021, ⟨10.1049/hve2.12105⟩
High Voltage, Vol 6, Iss 6, Pp 1069-1078 (2021)
International audience; An experimental study of the inception of the first-mode negative streamer at liquid/solid interfaces is presented in this article. The study is performed with a point-plane configuration under square high voltage pulses. The
Publikováno v:
High Voltage, Vol 6, Iss 5, Pp 850-860 (2021)
Increasing demand for electric power in more electric aircraft requires a higher operating voltage for the power system that leads to higher electric stress on the insulation system. Operating at high altitudes where the electrical strength of air is
Publikováno v:
IET Electric Power Applications
Herein, a set of experimental procedures is presented for determining the main electrical distributed parameters of the field winding in salient pole synchronous machines. It applies to the electrical characterisation of iron-core power inductors and
Publikováno v:
IET Electric Power Applications, Vol 15, Iss 8, Pp 979-997 (2021)
This article presents a novel Direct Field‐Oriented Control (DFOC) strategy for Fault‐Tolerant Control (FTC) of wye‐connected 3‐Phase Induction Machine (3‐PIM) drives under the stator winding open‐phase failure. In the proposed control st
Publikováno v:
IET Microwaves, Antennas & Propagation, Vol 15, Iss 8, Pp 904-909 (2021)
This study presents for the first time the feasibility of a coplanar isolator using YIG material for applications in the Ku, K and Ka bands. The proposed structure is an asymmetric coplanar waveguide with a transverse array of unopened slots etched o
Autor:
Miltiadis Moralis-Pegios, Xin Yin, Yoojin Ban, Tobias Lamprecht, Theoni Alexoudi, Hannes Ramon, Konstantinos Fotiadis, Andreas Lehnman, Charoula Mitsolidou, Johan Bauwelinck, Joris Van Campenhout, Joris Lambrecht, Stelios Pitris, Peter De Heyn, Nikos Pleros
Publikováno v:
IET Optoelectronics, Vol 15, Iss 2, Pp 102-110 (2021)
IET OPTOELECTRONICS
IET OPTOELECTRONICS
Multi‐socket server boards (MSBs) exploit the interconnection of multiple processor chips towards forming powerful cache coherent systems, with the interconnect technology comprising a key element in boosting processing performance. Here, we presen
Autor:
Joris Van Kerrebrouck, Alexander Eichler, Felix Betschon, Holger Gaul, Tobias Lamprecht, Johan Bauwelinck, Joris Lambrecht, Xin Yin
Publikováno v:
IET OPTOELECTRONICS
IET Optoelectronics, Vol 15, Iss 2, Pp 92-101 (2021)
IET Optoelectronics, Vol 15, Iss 2, Pp 92-101 (2021)
Chip‐on‐board silicon photonics O‐band wavelength‐division multiplexing transceivers have been developed that will eventually enable high‐throughput on‐board optical communication for multi‐socket on‐board communication. This direct,
Publikováno v:
IET Science, Measurement & Technology. 14:886-892
Ethylene–propylene rubber (EPR) cable is the most commonly used type in high-speed railway. Several flashover accidents take place in cable termination in an extremely cold environment. In this study, EPR cable terminations were tested in a simulat
Autor:
Amizhtan Somasundaram Karthikeyan, Nathaniel Taylor, Gorla Durga Pawan Mahidhar, Hans Edin, Ramanujam Sarathi
Publikováno v:
IET Science, Measurement & Technology. 14:1029-1036
The proposed study compares the electrical, thermal and mechanical performances of thermally aged cellulose pressboard material impregnated in mineral oil, synthetic ester fluid and mixed oil. The electrical insulation characteristics of oil-impregna