Zobrazeno 1 - 10
of 52
pro vyhledávání: '"Nakanishi A"'
Publikováno v:
Thin Solid Films. 721:138551
The different interface width and alloy composition of the Fe-on-Ti and Ti-on-Fe interfaces has been concluded recently from conversion-electron Mossbauer spectroscopy and x-ray reflectivity measurements of Ti/57Fe/Ti trilayers. Now it is shown by Mo
Publikováno v:
Thin Solid Films. 612:231-236
Zinc-tin oxide (ZTO) films can exhibit high visible light transparency, high electrical conductivity and glass-like dense structures; therefore, they are expected to be applied as transparent conductive oxide and barrier layers. In this study, the in
Autor:
Makoto Nakanishi, Tomohiro Mino, Jun Takada, Shunsuke Kanamaru, Tatsuo Fujii, Hideki Hashimoto
Publikováno v:
Thin Solid Films. 591:245-249
Ilmenite–hematite solid solution (Fe 2– x Ti x O 3 ) is one of the candidates for high-temperature magnetic semiconductors. Well-crystallized and epitaxially formed Fe 2– x Ti x O 3 films on α-Al 2 O 3 (112¯0) single-crystalline substrates we
Publikováno v:
Thin Solid Films. 532:141-146
The effect of nitrogen addition to the sputter gas during Ag deposition on the salt-water durability of the Ag thin films was investigated. The Ag thin films deposited in sufficient nitrogen exhibited better salt-water durability and almost the same
Autor:
Koji Nakanishi, Toshiaki Ohta, Shintaro Osada, Takashi Minemoto, Yasuhiro Abe, Shohei Fukamizu, Hideyuki Takakura, Yusuke Oda
Publikováno v:
Thin Solid Films. 520:5640-5643
Transfer of a CuInS2 thin film grown on a Mo/soda-lime glass substrate was investigated using a lift-off process. The CuInS2 thin film was flatly exfoliated, with preferential peeling occurring in the CuInS2/MoS2 interface vicinity. This suggests tha
Publikováno v:
Thin Solid Films. 520:4291-4296
Well-aligned zinc oxide (ZnO) nanorods were synthesized using a low-temperature hydrothermal method employing a zinc/sodium dodecyl sulfate (Zn/SDS) composite as a seed layer. The results of X-ray diffraction measurements indicate that the Zn/SDS com
Publikováno v:
Thin Solid Films. 519:4487-4490
We have investigated the improvement of the corrosion resistance of metal products using a SiCN coating deposited by hot-wire chemical vapor deposition (HWCVD). We used brass as a metal product. SiCN coated brass was immersed in a 10% sulfuric acid s
Publikováno v:
Thin Solid Films. 518(No. 14):3875-3878
Zinc oxide (ZnO) stacked films were prepared by repeating a procedure involving KrF excimer laser irradiation at various energy fluences (Ef) of sol–gel-derived precursors. All the stacked films are wurtzite-type and highly c-axis oriented on glass
Autor:
Saoussen Merdes, Z. Hadjoub, Shizutoshi Ando, Hachiro Nakanishi, Mutsumi Sugiyama, A. Kinoshita, M. Sano
Publikováno v:
Thin Solid Films. 516:7335-7339
To investigate the effect of alternating Cu poor/Cu rich/Cu poor/Cu rich/ layers in Cu–In precursors on the properties of the absorber, CuInSe2 polycrystalline thin films were prepared on glass substrates using the spin coating technique by thermal
Publikováno v:
Thin Solid Films. 516:6028-6032
Polymeric perfluorocarbon was deposited on the Si, Ag and Al substrates in Ar/ c -C 4 F 8 plasmas under a deposition rate of 10 nm/h for seven hours. The X-ray photoelectron spectra and atomic force microscope images of the deposited materials were o