Zobrazeno 1 - 10
of 13
pro vyhledávání: '"Akira Nakayama"'
Autor:
Akira Nakayama, Katsuhiko Inagaki
Publikováno v:
Sen'i Gakkaishi. 48:177-183
The bending deformation of clothes acting on a lateral load and compressive load were discussed by means of “The simulation used with an area moment method” which were suggested in the previous paper. The authors proposed a new simulation method
Publikováno v:
Sen'i Gakkaishi. 35:T112-T118
In order to get a foam flexible and heat insulating under high static hydraulic pressure, a flexible rubber foam orderly embedded with spherical rigid foams was formed. Its thermal conductivity and flexural rigidity were studied.1) Assuming a unit mo
Autor:
Katsuhiko Inagaki, Akira Nakayama
Publikováno v:
Sen'i Gakkaishi. 40:T151-T157
The method to evaluate the bending rigidities of inhomogeneous cloths was studied.The results are as follows:(1) The bending behavior of an inhomogeneous cloth, irrespective of distributions of bending rigidities, was analyzed by the method proposed
Autor:
Akira Nakayama
Publikováno v:
Sen'i Gakkaishi. 41:T120-T124
In this study, the bending behavior of laminated cloths with stitched parallel seam lines (stitch pitch; p) and laminated cloths with cross seam lines were examined in various deflecting conditions.The results are as follows:(1) In the case of lamina
Autor:
Akira Nakayama
Publikováno v:
Sen'i Gakkaishi. 37:T415-T419
In order to clarify the bending properties of the laminated clothes having regularly different bending rigidities, such as the padded clothes or the quilting coats, a non-uniform beam model whose bending rigidity is variant along the direction of the
Publikováno v:
Sen'i Gakkaishi. 33:T6-T12
The temperature dependence of the tensile strengths of epoxy resin and unsaturated polyester resin reinforced with random-planar orientation of short glass fibers was studied.In both composites, the tensile strength decrease with increase in temperat
Autor:
Katsuhiko Inagaki, Akira Nakayama
Publikováno v:
Sen'i Gakkaishi. 40:T202-T208
In this study, the anisotropy of bending rigidities of cloths with stitched seams were examined.The results are as follows:(1) When specimens (length; L, width; W) were cut at an angle θ for warp direction from cloths with parallel seam lines stitch
Publikováno v:
Sen'i Gakkaishi. 33:T1-T6
In the short glass fiber-thermosetting resin composites the critical fiber length is one of the dominating causes for the effect of reinforcement. In this paper, a method was devised to determine the critical fiber length accurately, and the temperat
Autor:
Katsuhiko Inagaki, Akira Nakayama
Publikováno v:
Sen'i Gakkaishi. 40:T44-T52
Autor:
Akira Nakayama
Publikováno v:
Sen'i Gakkaishi. 42:T423-T430