Zobrazeno 1 - 10
of 10
pro vyhledávání: '"Xiaopeng Li"'
Publikováno v:
Journal of Materials Research and Technology, Vol 29, Iss , Pp 3487-3493 (2024)
Gas tungsten arc welding (GTAW) based wire arc additive manufacturing (WAAM) process is first used to fabricate a thin wall of LA103Z magnesium-lithium alloy. Results indicate that the grain size of the LA103Z thin-walled bottom region significantly
Externí odkaz:
https://doaj.org/article/396cef7263aa48ebaa91b428bcd0dead
Publikováno v:
Journal of Materials Research and Technology, Vol 29, Iss , Pp 28-39 (2024)
In this paper, the 316L stainless steel matrix composite strengthened by TiB2 was successfully fabricated using laser cladding additive manufacturing technology. The microstructures of 316L/TiB2 with the addition of TiB2 (mass fractions of 0, 3 and 6
Externí odkaz:
https://doaj.org/article/b1c9581dbfd24bcb93795573b3f7b05b
Publikováno v:
Journal of Materials Research and Technology, Vol 26, Iss , Pp 9157-9168 (2023)
With the continuous development of flexible transparent electrodes, silver nanowires have been widely used due to their excellent optoelectronic properties and flexibility. However, their progress has been hindered by high contact resistance. In this
Externí odkaz:
https://doaj.org/article/d75a3aba143c4680ada9d3a775b00887
Publikováno v:
Journal of Materials Research and Technology, Vol 24, Iss , Pp 4517-4533 (2023)
As a reinforcing phase, TiB2 exhibits exceptional wettability and stability when mixed with steel matrices, making it an ideal reinforcement for steel matrix composites. In this paper, we add TiB2 for additive manufacturing of 18Ni300 steel for weigh
Externí odkaz:
https://doaj.org/article/4913a627d0ee4ef08fea972372994962
Publikováno v:
Journal of Materials Research and Technology, Vol 21, Iss , Pp 4950-4959 (2022)
In this study, a drawing arc stud welding method combined with a longitudinal magnetic field was used for welding a 30CrNi3MoV low-alloy super strong steel substrate and Q235 hollow steel, and the effects of a longitudinal magnetic field on the micro
Externí odkaz:
https://doaj.org/article/ca5dacbc3e7a4887b2ab96808a78f3a2
Publikováno v:
Journal of Materials Research and Technology, Vol 18, Iss , Pp 405-415 (2022)
The friction stir welding (FSW) joints of CNT/Al-Cu-Mg composites have severe flash defects and softening phenomena due to the excessive heat input. In this paper, underwater friction stir welding (UFSW) was used to transfer the heat input and increa
Externí odkaz:
https://doaj.org/article/3f7a8555daee451bb8ab69afae08c575
Publikováno v:
Journal of Materials Research and Technology, Vol 14, Iss , Pp 2658-2664 (2021)
The strength-ductility trade-off problem of carbon nanotube (CNT) reinforced aluminum matrix nanocomposites (AMNCs) restricts its further application. Hence, we report the fabrication of nano-Al4C3 reinforced AMNCs through friction stir processing (F
Externí odkaz:
https://doaj.org/article/0c4ec3bfab544309b590bb67ded5ff79
Publikováno v:
Journal of Materials Research and Technology, Vol 30, Iss , Pp 7284-7294 (2024)
In this work, a two-stage rolling method with varied temperature and strain rate was proposed for powder metallurgy (PM) Ti–47Al–2Cr–2Nb-0.2W alloy sheets based on the guidance of processing map and microstructure evolution. Compared with conve
Externí odkaz:
https://doaj.org/article/39e1a5afcc584c049ed27ea36f539d0a
Autor:
Xianli Cao, Li Wang, Hui Tao, Weiwei He, Xiaopeng Liang, Bin Liu, Michael Oehring, Jonathan Paul, Florian Pyczak, Yong Liu
Publikováno v:
Journal of Materials Research and Technology, Vol 29, Iss , Pp 4181-4190 (2024)
In this study, the influence of the Ti3AlC carbide morphology on the creep properties, the interaction between carbides and dislocations during creep deformation as well as the influence of external stress on carbide morphology evolution were investi
Externí odkaz:
https://doaj.org/article/0bef67d2627b4c5790a0e58f988238cf
Publikováno v:
Journal of Materials Research and Technology, Vol 26, Iss , Pp 7605-7618 (2023)
The impacts of non-isothermal aging treatment (NIA) on the microstructure and corrosion resistance of WE43 magnesium alloy was examined through weight loss experiments, hydrogen evolution experiments, electrochemical assessments, three-dimensional mi
Externí odkaz:
https://doaj.org/article/79c72421568740878c9ba571268cec7b