Zobrazeno 1 - 10
of 41
pro vyhledávání: '"Perin, A"'
Publikováno v:
IEEE Transactions on Magnetics. 56:1-9
Determining the stator slot design parameters of the alternator has a great importance to provide the desired magnetic flux distribution for a permanent magnet generator (PMG). The objective of this article was to investigate the optimum design param
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Publikováno v:
IEEE Transactions on Magnetics. 32:2051-2054
In the first phase of the R&D programme for LHC dipoles, seven 10-m-long, 50-mm-aperture prototypes have been manufactured by European Industries. The first two prototypes, fabricated under a CERN-INFN Collaboration, were successfully tested in 1994.
Autor:
Kiyosumi Tsuchiya, Norio Higashi, Norihito Ohuchi, Akira Yamamoto, D. Leroy, Yoshikuni Doi, Tomiyoshi Haruyama, Hiromi Hirabayashi, Toru Ogitsu, Nobuhiro Kimura, S. Kato, Seog-Whan Kim, Hiroshi Kawamata, G. Brianti, T.M. Kobayashi, Kenichi Tanaka, T. Shintomi, A. Terashima, Hiroshi Yamaoka, R. Perin, S. Mizumaki, Yasuhiro Makida
Publikováno v:
IEEE Transactions on Magnetics. 32:2116-2119
A single aperture dipole magnet has been developed with a design magnetic field of 10 tesla by using Nb-Ti/Cu conductor to be operated at 1.8 K in pressurized super fluid helium, The magnet features double shell coil design by using high keystone Rut
Publikováno v:
IEEE Transactions on Magnetics. 32:2101-2104
FE-calculations have been carried out for the cross-section of the 56 mm superconducting LHC dipole prototype with aluminium common collar and a vertically split yoke. The structure has been studied at room temperature and at 1.8 K both energized and
Publikováno v:
IEEE Transactions on Magnetics. 30:1793-1796
A number of 10 m long dipole prototypes for the LHC is being manufactured by European industries, under CERN technical responsibility. This paper resumes the main developments of the design as well as the retained technological solutions for the fabr
Publikováno v:
IEEE Transactions on Magnetics. 30:1823-1826
The Large Hadron Collider (LHC) will require a range of superconducting corrector magnets. This paper presents the design of sextupole and decapole corrector coils which will be included as spool pieces adjacent to each main ring dipole. The paper gi
Publikováno v:
IEEE Transactions on Magnetics. 28:386-389
The design options for the superconducting multipole corrector MDOS for the LHC (Large Hadron Collider) are reviewed. A series coil option is studied. The series coil design is able to meet the specified correction requirements within the total lengt
Publikováno v:
IEEE Transactions on Magnetics. 28:342-345
CERN is preparing for the construction of the Large Hadron Collider (LHC) to be installed in the Large Electron Positron Collider (LEP) tunnel. The magnetic lattice of the LHC will consist of a ring of twin-aperture dipoles and quadrupoles, connected
Autor:
Y. Pabot, J.M. Baze, P. Vedrine, J.P. Jacquemin, C. Michez, T. Tortschanoff, J.M. Rifflet, J. C. Toussaint, R. Perin, D. Cacaut, M. Chapman, N. Siegel, J. Perot, C. Lyraud
Publikováno v:
IEEE Transactions on Magnetics. 28:335-337
Within the framework of the LHC (Large Hadron Collider) R&D program, CERN and CEA/Saclay have established a collaboration to carry out the design, building and testing of a superconducting LHC prototype quadrupole at the Saclay laboratory. The cold m