Zobrazeno 1 - 9
of 9
pro vyhledávání: '"316"'
Autor:
David Itzhak, O. Elias
Publikováno v:
CORROSION. 50:131-137
Cylindrical tensile specimens of AISI type 304 (UNS S30400) and type 316 (UNS S31600) stainless steels (SS) were tested under constant-load conditions in 55% lithium bromide (LiBr) heavy b...
Publikováno v:
Corrosion. 41:720-727
The corrosion behavior of AISI 304 and 316 stainless steels (SSs) in hot concentrated caustic soda solutions was investigated under heat-transfer conditions. The corrosion potential of the specimens was located in the active region; thus, the alloys
Publikováno v:
CORROSION. 63:1114-1123
The rate of stress corrosion cracking (SCC) was measured for nonsensitized, cold-worked Type 316 (UNS S31600) and Type 304 (UNS S30400) in both hydrogenated pressurized water reactor (PWR)...
Autor:
Rokuro Nishimura, Yasuaki Maeda
Publikováno v:
CORROSION. 60:650-657
The stress corrosion cracking (SCC) behavior of the commercial austenitic stainless steels, Type 304 and Type 316 (UNS S30400 and UNS S31600), has been investigated in acidic solutions to ...
Publikováno v:
CORROSION. 58:57-71
The corrosion and galvanic compatibility of a high-strength copper-nickel alloy, MARINEL, to martensitic (Type 416 S21 [UNS S41600]) and general-purpose austenitic (Type 316 S11 [UNS S31600]) stainless steels (SS) were investigated in natural seawate
Publikováno v:
CORROSION. 48:455-462
Slow strain rate test on tensile specimens with hump were conducted on 304 (UNS S30400) and 316 (UNS S31600) stainless steels with different heat treatments in lithiated hydrogenated water...
Autor:
Stephen M. Bruemmer
Publikováno v:
CORROSION. 46:556-562
Existing capabilities to quantitatively model carbide precipitation and sensitization development in austenitic stainless steels are assessed and critically analyzed. A theoretically based, empirically modified model is described that predicts carbid
Autor:
J. W. Oldfield
Publikováno v:
CORROSION. 46:574-581
A major use of stainless steel is in chloride-containing environments; the limiting factor that most frequently determines an alloy's suitability to such environments is its crevice corrosion resistance. The objective of this work was to examine in d
Publikováno v:
CORROSION. 44:328-333
Direct measurements of grain boundary chromium depletion by energy dispersive x-ray spectroscopy (EDS) in a scanning transmission electron microscope (STEM) are compared to measurements of the degree of sensitization (DOS) using the electrochemical p