Zobrazeno 1 - 10
of 141
pro vyhledávání: '"77"'
Autor:
Philippe Tribolet, Alain Manissadjian, Xavier Marcadet, Philippe Bois, Eric Herniou, Eric Costard
Publikováno v:
Infrared Technology and Applications XXVII.
Standard GaAs/AlGaAs QWIPs are now well established for LWIR detection. The main advantage of this technology is the duality with the technology of commercial GaAs devices. The realization of large FPAs (up to 640 X 480) drawing on the standard III-V
Publikováno v:
Physics and Simulation of Optoelectronic Devices VII.
3D numerical simulation of intracavity-contacted oxide-confined VCSELs operating at cryogenic temperatures is reported. Spatial profiles and 3D distributions of electrical potential, current and ture are calculated. The device geometry is found to ca
Autor:
Jumpei Murooka, Masafumi Kimata, Hiroshi Inada, Michito Sakai, Yasuhiro Iguchi, Ayaka Kumeta, Toshiyoshi Kimura, Yuta Hiroe
Publikováno v:
Infrared Technology and Applications XLIII.
One of JAXA’s future missions, using an imaging Fourier Transform Spectrometer (FTS), requires the focal plane array (FPA) that has high sensitivity up to the very long-wavelength infrared (VLWIR) region. Since a Type-II superlattice (T2SL) is the
Publikováno v:
8th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optoelectronic Materials and Devices.
High sensitive Terahertz detection can be achieved by properly constructing Metal-Semiconductor-Metal (MSM) structure with semiconductor materials. In this study, Mercury-Cadmium-Telluride (MCT) film was used to fabricate MSM Terahertz detectors. The
Publikováno v:
SPIE Proceedings.
This paper reports a study of Shockley-Read-Hall, radiative, and Auger recombination processes in a series of molecular beam epitaxy grown InAs/InAsSb mid-wavelength infrared and long-wavelength infrared type-II superlattice samples using temperature
Publikováno v:
SPIE Proceedings.
We realise growth of both GaAsP and GaAs core nanowires (NWs), as well as GaAsP core-shell NWs grown on (111) Si substrates using solid source molecular beam epitaxy (MBE). By modifying the growth conditions it is possible to change the dimensions of
Autor:
James McCurdy, Chris Kamilar, Pradip Mitra, M. R. Skokan, Richard Scritchfield, Xiaoli Sun, Terry Welch, Jeffrey D. Beck, Kirk Reiff, James B. Abshire
Publikováno v:
SPIE Proceedings.
A 16 element HgCdTe e-APD detector has been developed for lidar receivers that has significant improvements in sensitivity in the spectral range from < 1μm to 4 μm. A demonstration detector consisting of a 4x4 APD detector array, with 80 μm square
Autor:
Tunay Tansel, Atilla Aydinli, Coskun Kocabas, Omer Salihoglu, Kutlu Kutluer, Rasit Turan, Abdullah Muti
Publikováno v:
SPIE Proceedings.
We have achieved significant improvement in the electrical performance of the InAs/GaSb midwave infrared photodetector (MWIR) by using atomic layer deposited (ALD) aluminium oxide (Al2O3) as a passivation layer. Plasma free and low operation temperat
Autor:
Yanqiu Lv, Qingduan Meng
Publikováno v:
SPIE Proceedings.
Planar InGaAs/InP p-i-n photodiodes have been successfully fabricated, and its spectral response, current-voltage characteristic, photogenerated signal and noise were measured at 300 K and 77 K with the blackbody temperature fixed at 900 K. It was fo
Autor:
Jarrod Vaillancourt, Xuejun Lu
Publikováno v:
SPIE Proceedings.
We report a very longwave Infrared (> 14 μm) quantum dot photodetector working at 77 K. Very longwave infrared (VLWIR) detection at a cut-off wavelength of 15.3 μm was achieved through QD size engineering. Peak specific photodetectivity D* of 3.3x1