Zobrazeno 1 - 10
of 79
pro vyhledávání: '"316"'
Publikováno v:
Journal of Materials Science. 48:997-1004
A type 316 austenitic stainless steel sheet with various texture components along its thickness was slightly cold-rolled and then sequentially annealed at 1000 °C for 80 and 150 min. The evolution of texture and the development of grain clusters in
Publikováno v:
Journal of Materials Science. 45:1782-1789
This study deals with simulation of low-cycle fatigue (LCF), followed by evaluation of fatigue parameters, which would be suitable for estimating fatigue lives under uniaxial loading. The cyclic elastic–plastic stress–strain responses were analyz
Autor:
K. G. Samuel, P. Rodriguez
Publikováno v:
Journal of Materials Science. 40:5727-5731
The influence of prior cold work on the stress strain behavior of a type 316 stainless steel is investigated at 300 K. The Ludwigson relation and the often cited explanation for the Ludwigson type stress strain behavior found in stainless steels to a
Publikováno v:
Journal of Materials Science. 41:2449-2455
In this article, stress relaxation in bending of AISI 316 stainless steel at 773 K during 490 hours is characterized. Samples were cut either parallel or transverse to the rolling direction and treated at different temperatures prior to the bending t
Autor:
Ke Han, Steven T. Downey, Nicholas Bembridge, Gregory S. Rohrer, Peter N. Kalu, Herbert M. Miller
Publikováno v:
Journal of Materials Science. 42:9543-9547
A stereological analysis of electron backscatter diffraction data has been used to measure the five-parameter grain boundary character distribution of chemically modified 316LN stainless steel exposed to both elevated and cryogenic temperature. The r
Autor:
E. Aghion, C. A. Molaba
Publikováno v:
Journal of Materials Science. 29:1758-1764
The creep-fatigue behaviour of SAF 2205 duplex stainless steel and 316 austenitic stainless steel was studied under a sulphur-containing environment of an Ar + 3%SO2 atmosphere at 700°C. The cyclic loading employed creep-tension and plastic compress
Autor:
P. Rozenak
Publikováno v:
Journal of Materials Science. 25:2532-2538
Hydrogen embrittlement of AlSl type 316, 321 and 347 stainless steels with nitrogen alloying has been studied by a tensile test through cathodic charging. The results show that addition of nitrogen improved resistance to hydrogen cracking regardless
Autor:
T. R. G. Kutty, C. Ganguly
Publikováno v:
Journal of Materials Science. 27:908-912
The high-temperature mechanical properties of SS 316 end-plug welds of nuclear fuel pins were studied using a hot hardness tester. The hardness was measured as a function of temperature on the base metal, weld pool and heat-affected zone from ambient
Autor:
J. J. Smith, R. A. Farrar
Publikováno v:
Journal of Materials Science. 26:5025-5036
Several 316 manual metal arc weld metals produced with commercial and experimental consumables were aged between 600 and 850 °C. This resulted in the dissolution of the δ-ferrite with the appearance of new austenite, M23C6, intermetallics σ, χ an
Publikováno v:
Journal of Materials Science. 25:5248-5256
The effect of molten tellurium and tellurium/caesium mixtures on the mechanical properties of Type 316 steel have been assessed at temperatures between 460 and 800 ° C using slow and fast strain rates. Tellurium embrittled the steel at temperatures