Zobrazeno 1 - 8
of 8
pro vyhledávání: ''
Publikováno v:
Case Studies in Construction Materials, Vol 15, Iss, Pp e00766-(2021)
This study focuses on the development of an insulating cementitious adhesive for bonding Carbon Fibre Reinforced Polymer (CFRP) fabrics to a concrete surface. The epoxy adhesive which is the generally used adhesive for CFRP shows a low thermal perfor
Publikováno v:
Case Studies in Construction Materials, Vol 15, Iss, Pp e00608-(2021)
Bagger, A M T, Kunther, W, Sigvardsen, N M & Jensen, P E 2021, ' Screening for key material parameters affecting early-age and mechanical properties of blended cementitious binders with mine tailings ', Case Studies in Construction Materials, vol. 15, e00608 . https://doi.org/10.1016/j.cscm.2021.e00608
Bagger, A M T, Kunther, W, Sigvardsen, N M & Jensen, P E 2021, ' Screening for key material parameters affecting early-age and mechanical properties of blended cementitious binders with mine tailings ', Case Studies in Construction Materials, vol. 15, e00608 . https://doi.org/10.1016/j.cscm.2021.e00608
Considering the vast amounts and wide variability of tailings available worldwide, means to assess the potential of tailings for cement clinker replacement based on their physical, chemical and mineralogical characteristics would be useful. This work
Publikováno v:
Case Studies in Construction Materials, Vol 15, Iss, Pp e00571-(2021)
Cement is the most widely used and adaptable material in the construction industry due to its numerous good properties. On the other hand, it contributes to the emission of carbon dioxide and has a dull grey appearance. To remedy this, a new type of
Publikováno v:
Case Studies in Construction Materials, Vol 12, Iss, Pp-(2020)
This study investigated the effect of high temperature heat - treatment (HTHT) on alkali attack resistance of hardened fly ash geopolymer binders. A mix of sodium silicate and sodium hydroxide was used to activate low calcium (Class F) fly ash for pr
Autor:
Juan J. del Coz-Díaz, Gonzalo Martínez-Barrera, F. Lopez-Gayarre, Víctor Varela-Guerrero, Miguel Martínez-López
Publikováno v:
Case Studies in Construction Materials, Vol 11, Iss, Pp-(2019)
Scopus
RUO. Repositorio Institucional de la Universidad de Oviedo
instname
Scopus
RUO. Repositorio Institucional de la Universidad de Oviedo
instname
In this work, the effects of waste polymer particles and gamma radiation on the mechanical properties of polyester mortars were studied. Control mortar was elaborated with polyester resin (20%), and silica sand (80%). This last was partially substitu
Publikováno v:
Case Studies in Construction Materials, Vol 8, Iss, Pp 299-314 (2018)
Bakelite waste from industrial manufacturing may be a hazard to the environment and public health. The utilization of waste Bakelite (WB) to replace natural aggregates (NA), such as natural coarse aggregate (NCA) and natural fine aggregate (NFA), in
Autor:
Nassif Nazeer Thaickavil, Job Thomas
Publikováno v:
Case Studies in Construction Materials, Vol 8, Iss, Pp 23-38 (2018)
This is a case study presenting the cracking behavior and assessment of the compressive strength of masonry prisms. The compressive strength of masonry was determined by performing laboratory tests on 192 masonry prism specimens corresponding to 3 sp
Autor:
Seree Tuprakay, Nopagon Usahanunth
Publikováno v:
Case Studies in Construction Materials, Vol 6, Iss C, Pp 120-133 (2017)
Bakelite material has been used to produce the various components for cars and consumer goods industry in Thailand. The growth of Bakelite consumption increases Bakelite waste. Bakelite waste is prohibited from disposing of direct landfilling and ope